Loading ...
Loading ...
Loading ...
20
15. After the ow of hot water stops, the appliance automati-
cally resets to "Ready for coee" status.
The new lter is active and indicated by an asterisk displayed
under "Install lter" in the menu. You can now use the appliance.
15.2 Replacing the lter
When "REPLACE FILTER" appears on the display (B1), after two
months (see date indicator) or when the appliance has not been
used for three weeks, you should replace the lter (C4):
1. Extract the tank (A9) and exhausted lter;
2. Take the new lter out of its packet and proceed as illus-
trated in points 2, 3, 4, 5 and 6 in the previous section;
3. Position a container with a minimum capacity of 16,9
.oz./500ml under the hot water spout;
4. Press the P button (B4) to enter the menu;
5. Turn the selection dial (B2) until "Replace lter" is
displayed;
6. Press the button (B9);
7. The message "Conrm?" is now displayed;
8. Press the button to conrm the selection;
9. "HOT WATER Conrm?" is displayed;
10. Press the button to conrm the selection. The appli-
ance begins hot water delivery and the message "Please
wait" is displayed;
11. After the ow of hot water stops, the appliance automati-
cally resets to "Ready for coee" status.
The new lter is now active and you can use the coee machine.
15.3 Removing the lter
If you want to use the appliance without the lter (C4), you
must remove it and notify the appliance of its removal. Proceed
as follows:
1. Extract the tank (A9) and exhausted lter;
2. Press the P button (B4) to enter the menu;
3. Turn the selection dial (B2) (g. 9) until "Install lter *"
appears on the display (B1);
4. Press the button (B4);
5. "Disable?" appears on the display;
6. Press the button to conrm and the button
(B5) to exit the menu.
16. TECHNICAL DATA
Voltage: 120 V~ 60 Hz max. 10A
Power: 1250W
Pressure: 1.5MPa (15 bars)
Max. water tank capacity: 60,86 . oz/1.8 l
Size LxDxH: 240x430x350 mm
Cord length: 1350 mm
Weight: 342,15 oz/ 9.7 kg
Max. beans container capacity: 8.82 oz/ 250 g
Loading ...
Loading ...
Loading ...