Loading ...
Loading ...
Loading ...
12
9.3 Customising the "my coee" quantity
The appliance is set by default to automatically deliver 1,01
.oz. / 30ml of "my coee". To modify this quantity, proceed as
follows:
1. Place a cup under the coee spouts (A13) (g. 9);
2. Turn the selection dial (B2) (g. 7) until "MY COFFEE" is
displayed;
3. Press and hold the button (B7) (g. 10) until the
message "1 MY COFFEE Program quantity" appears on the
display (B1) and coee delivery begins. Then release the
button;
4. As soon as the coee in the cup reaches the required level,
press the button (g. 10) again.
The quantity of coee in the cup has now been programmed.
9.4 Adjusting the coee mill
The coee mill is set by default to prepare coee correctly and
should not require regulating initially.
However, if after making the rst few coees you nd that the
coee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (A2) (g. 11).
Please note:
The grinding adjustment dial must only be turned when the
coee mill is in operation.
If the coee is delivered too slowly or not
at all, turn one click clockwise towards 7.
For fuller bodied creamier coee, turn
one click anticlockwise towards 1 (do
not turn more than one click at a time
otherwise the coee could be delivered
a drop at a time).
These adjustments will only be evident after at least 2 cups of
coee have been delivered. If this adjustment does not obtain
the desired result, turn the dial another click.
9.5 Tips for a hotter coee
For hotter coee, you should:
• perform a rinse cycle before delivery by pressing the
button (B5), as described in section “9. making coee”;
• warm the cups with hot water using the hot water function
(see section “11. Hot water”);
• select the "high" coee temperature in the menu (see sec-
tion “7.8 Setting the temperature”).
9.6 Making coee using coee beans
Important!
Do not use caramelised or candied coee beans as they could
stick to the coee mill and make it unusable.
1. Press the P button (B4) to enter the menu;
2. Turn the selection dial (B2) (g. 7) until "Cup lighting" ap-
pears on the display (B1);
3. Press the button (B9). "Disable?" or "Enable?" ap-
pears on the display (B1);
4. Press the button to enable or disable the cup
lighting;
5. When the function is active, an asterisk appears under
"Cup lighting" in the menu. Press the button (B5)
to exit the menu.
7.13 Default values (reset)
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).
To reset the default values, proceed as follows:
1. Press the P button (B4) to enter the menu;
2. Turn the selection dial (B2) (g. 7) until "Default values"
appears on the display;
3. Press the button (B9);
4. The message "Conrm?" is now displayed;
5. Press the button to conrm and exit.
7.14 Statistics function
This displays statistics relating to the machine. To display, pro-
ceed as follows:
1. Press the P button (B4) to enter the menu;
2. Turn the selection dial (B2) (g. 7) until "Statistics" appears
on the display (B1);
3. Press the button (B9);
4. Turn the selection dial to verify:
- how many coees have been made;
- the total number of cappuccinos and milk-based coees
made;
- the total number of litres of water delivered;
- how many times the machine has been descaled;
- how many times the water softener lter has been
replaced.
5. Press the button (B5) twice to exit the menu.
8. RINSING
Use this function to deliver hot water from the coee spouts
(A13) and hot water spout (C6), if inserted, to clean and heat
the appliance’s internal circuit.
Place a container with a minimum capacity of 3,38 . oz./100ml
under the coee and hot water spouts (g. 5).
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.
1) To enable this function, press the button (B5).
"RINSING, Please wait" appears on the display (B1);
2) After a few seconds, hot water is delivered rst from the
coee spouts, then from the hot water spout (if inserted)
to clean and heat the appliance’s internal circuit. "RINSING"
appears on the display, together with a progress bar which
lls gradually as preparation proceeds;
3) To stop the process press any button or wait for delivery of
water to stop automatically.
Please note!
• If the appliance is not used for more than 3-4 days, when
switched on again, we strongly recommend performing
2/3 rinses before use;
• After cleaning, it is normal for the coee grounds container
(A13) to contain water.
9. MAKING COFFEE
9.1 Selecting the coee taste
The appliance is set by default to make coee with a standard
taste.
You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the aroma selection button
(B6) (g. 8) repeatedly until the required taste appears on the
display (B1).
9.2 Selecting the quantity of coee in the cup
The appliance is set by default to make a standard quantity of
coee. To select the quantity of coee, turn the selection dial
(B2) (g. 7) until the message corresponding to the required
quantity of coee appears on the display (B1):
Coee selected Quantity in cup
(. oz.) /(ml)
MY COFFEE Programmable:
from ≃0,62/20
to ≃6,07/180
SHORT
≃1,35/40
STANDARD
≃2,03/60
LONG
≃3,04/90
EXTRA LONG
≃4,06/120
Loading ...
Loading ...
Loading ...