Loading ...
Loading ...
Loading ...
9
3.3 Description of the accessories
(page 2 - C )
C1. Indicator paper
C2. Pre-ground coee measure
C3. Descaler
C4. Water softener lter (certain models only)
C5. Cleaning brush
C6. Hot water spout
3.4 Description of the milk container
(page 2 - D )
D1. Froth adjustment and CLEAN dial
D2. Milk container lid
D3. Milk container
D4. Milk intake tube
D5. Frothed milk spout (adjustable)
4. BEFORE USE
4.1 Checking the appliance
After removing the packaging, make sure the product is com-
plete and undamaged and that all accessories are present. Do
not use the appliance if it is visibly damaged. Contact De’Longhi
Customer Services.
4.2 Installing the appliance
Important!
When you install the appliance, you should respect the follow-
ing safety warnings:
The appliance gives o heat. After positioning the appli-
ance on the worktop, leave a space of at least 3 cm be-
tween the surfaces of the appliance and the side and rear
walls and at least 15 cm above the coee maker.
Water penetrating the coee maker could cause damage.
Do not place the appliance near taps or sinks.
The appliance could be damaged if the water it contains
freezes.
Do not install the appliance in a room where the tempera-
ture could drop below freezing point.
Arrange the cord in such a way that it cannot be damaged
by sharp edges or contact with hot surfaces (e.g. electric
hot plates).
4.3 Connecting the appliance
Important!
Check that the mains power supply voltage corresponds to that
indicated on the rating plate on the bottom of the appliance.
Connect the appliance to an eciently earthed and correctly
installed socket with a minimum current rating of 10A only.
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualied
professional.
4.4 Setting up the appliance
Please note:
Coee has been used to factory test the appliance and it is
therefore completely normal for there to be traces of cof-
fee in the mill. The machine is, however, guaranteed to be
new.
You should customise water hardness as soon as possible
following the instructions in section “14. Setting water
hardness”.
1. Connect the appliance to the mains electricity supply (g.
1). Make sure the main switch (A8) at the back of the appli-
ance is pressed (g. 2);
2. Remove the water tank (A9), ll to the MAX line with fresh
water (g. 3A) then put back in the appliance (g. 3B);
You must rst choose the language by turning the selection dial,
or waiting until the languages scroll through on the display (B1)
automatically at intervals of about 3 seconds:
3. When "English" appears on the display, press the
button (B9) (g. 4) for a few seconds until "English set" is
displayed;
Follow the instructions indicated on the appliance display:
4. "INSERT WATER SPOUT": Check that the hot water spout
(C6) is inserted on the connection nozzle (A12) and place a
container holding a minimum of 3,38 . oz. (100ml) under-
neath (g. 5);
5. "HOT WATER Conrm?" appears on the display;
6. Press the button to conrm (g. 4). The appliance
delivers water from the spout then goes o automatically.
The coee machine is now ready for normal use.
Please note:
The rst time you use the coee maker, you need to make
4/5 cups of coee or 4/5 cappuccinos before it starts to give
satisfactory results.
When making the rst 5-6 cappuccinos, it is normal to hear
the noise of boiling water. After this, the noise becomes
less.
3. DESCRIPTION
3.1 Description of the appliance
(page 3 - A)
A1. Control panel
A2. Grinding adjustment dial
A3. Cup shelf
A4. Beans container lid
A5. Pre-ground coee funnel lid
A6. Pre-ground coee funnel
A7. Beans container
A8. Main switch
A9. Water tank
A10. Infuser door
A11. Infuser
A12. Hot water and steam connection nozzle
A13. Coee spouts (adjustable height)
A14. Coee grounds container
A15. Condensate tray
A16. Cup tray
A17. Drip tray water level indicator
A18. Drip tray
A19. Cup light
3.2 Description of the control panel
(page 2 - B )
A number of buttons on the panel have a double function. This is
indicated in brackets in the description.
B1. Display: guides the user in using the appliance
B2. Selection dial: turn to select the required quantity of cof-
fee. (When in the settings MENU, turn to select the required
function)
B3. button: turns the appliance on and o
B4. P button to access the menu
B5. button: to perform a rinse cycle.
(When in the settings MENU, it acts as the "ESC" button
to exit from the selected function and go back to the main
menu)
B6. aroma selection button: to select the coee
taste
B7. button: to make 1 cup of coee with the settings
displayed
B8. button: to make 2 cups of coee with the settings
displayed
B9. button to deliver hot water ( When in the MENU, it
acts as the "OK" button to conrm the selection made)
B10. CAPPUCCINO button: to prepare cappuccino or frothed milk
Loading ...
Loading ...
Loading ...