Loading ...
Loading ...
Loading ...
18
2. Immerse the paper completely in a glass of water for one
second;
3. Remove the paper from the water and shake lightly. After
about a minute, 1, 2, 3, or 4 red squares form, depending
on the hardness of the water. Each square corresponds to
one level;
14.2 Setting water hardness
1. Press the P button (B4) to enter the menu;
2. Turn the selection dial (B2) to select "Water Hardness".
3. Conrm the selection by pressing the button (B9);
4. Turn the selection dial and set the level shown by the indi-
cator paper (C1) (see previous section);
5. Press the button to conrm the setting;
6. Press the button (B5) to exit the menu.
The machine is now reprogrammed with the new water hard-
ness setting.
15. WATER SOFTENER FILTER
Certain models are tted with a water softener lter (C4). If this
is not the case with your model, you are recommended to pur-
chase one from De’Longhi Customer Services.
To use the lter correctly, follow the instructions below.
15.1 Installing the lter
1. Remove the lter (C4) from the packaging;
2. Turn the date indicator disk (see g. 38) until the next two
months of use are displayed;
3938
10. The appliance is now ready for rinsing through with clean
water. Empty the container used to collect the descal-
er solution. Extract the water tank, empty, rinse under
running water, ll with fresh water up to the MAX level
and put back in the appliance: "RINSING, Conrm?" is
displayed;
11. Place the container used to collect the descaler solution
empty under the coee spouts and hot water spout (g.
37);
12. Press the button to start rinsing. Hot water ows out
of the spouts and the message "Rinsing Please wait" is
displayed;
13. When the water tank is empty, the messages "RINSING",
"FILL TANK" and "REPLACE FILTER" (if previously removed)
alternate on the display;
14. Remove the water tank, replace the lter (if previously re-
moved), ll the tank up to the MAX level with fresh water
and insert it in the appliance: the display will show "RINS-
ING Conrm?";
15. Place the container used to collect the rinsing water empty
under the hot water spout;
16. Press the button to restart rinsing: Hot water ows
out of the hot water spout only and the message "RINSING
Please wait" is displayed;
17. When it nishes, the message "Rinsing complete, Con-
rm?" appears on the display;
18. Press the hot water button. The message "FILL
TANK" is displayed;
19. Empty the drip tray, remove and top up the water tank
with fresh water to the MAX level and put back in the
machine.
Descaling is complete.
Please note!
If the descaling cycle is not completed correctly (e.g. no
electricity) we recommend repeating the cycle;
After descaling, it is normal for the grounds container
(A14) to contain water.
14. SETTING WATER HARDNESS
The DESCALE message is displayed after a period of time estab-
lished according to water hardness.
The machine is set by default for a hardness value of 4. The ma-
chine can also be programmed according to the hardness of the
mains water in the various regions so that the machine needs to
be descaled less often.
14.1 Measuring water hardness
1. Remove the "TOTAL HARDNESS TEST" indicator paper (C1)
from its pack (attached to the English instructions);
You should use De’Longhi descaler only. Using unsuitable
descaler and/or performing descaling incorrectly may re-
sult in faults not covered by the manufacturer's guarantee.
1. Turn the appliance on and wait until it is ready for use;
2. Press the P button (B4) to access the menu;
3. Turn the selection dial (B2) until "Descale" is displayed;
4. Select by pressing the button (B9). "Descale Con-
rm?" appears on the display (B1). Press again to
enable the function;
5. "EMPTY DRIP TRAY" is displayed, alternating with "RE-
MOVE FILTER" (if the lter is present) and "Add descaler
Conrm?";
6. Empty the water tank (A9) completely and remove the
water softener lter (C4) (if present). Empty the drip tray
(A18) and grounds container (A14), then put them back in
the appliance;
7. Pour the descaler into the tank up to level A (corresponding
to a 3,40 . oz./100ml pack) marked on the side of the tank
(g. 36), then add water (33,85 .oz./1 litre) up to level B
(g. 36) and put the water tank back;
B
A
A B
3736
60,86 .oz
1,8 l
8. Place an empty container with a minimum capacity of
60,86 . oz / 1.8 litres under the coee spouts (A13) and
hot water spout (C6) (g. 37).
Important! Danger of burns
Hot water containing acid ows out of the coee spouts and
hot water spout. Take care to avoid contact with splashes of this
solution.
9. Press the button to conrm that you have added the
descaler solution. The message "Descale underway" is dis-
played and the descaling procedure begins. The descaler
liquid comes out of the coee spouts and hot water spout
and a series of rinses and pauses is performed to remove
limescale deposits from inside the machine;
After about 25 minutes, descaling stops and the messages
"RINSING" and "FILL TANK" alternate on the display.
Loading ...
Loading ...
Loading ...