Loading ...
Loading ...
Loading ...
13
9.3 Customising the "my coee" quantity
The appliance is set by default to automatically deliver 1,01
.oz. / 30ml of "my coee". To modify this quantity, proceed as
follows:
1. Place a cup under the coee spouts (A13) (g. 9);
2. Turn the selection dial (B2) (g. 7) until "MY COFFEE" is
displayed;
3. Press and hold the button (B7) (g. 10) until the
message "1 MY COFFEE Program quantity" appears on the
display (B1) and coee delivery begins. Then release the
button;
4. As soon as the coee in the cup reaches the required level,
press the button (g. 10) again.
The quantity of coee in the cup has now been programmed.
9.4 Adjusting the coee mill
The coee mill is set by default to prepare coee correctly and
should not require regulating initially.
However, if after making the rst few coees you nd that the
coee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (A2) (g. 11).
Please note:
The grinding adjustment dial must only be turned when the
coee mill is in operation.
If the coee is delivered too slowly or not
at all, turn one click clockwise towards 7.
For fuller bodied creamier coee, turn
one click anticlockwise towards 1 (do
not turn more than one click at a time
otherwise the coee could be delivered
a drop at a time).
These adjustments will only be evident after at least 2 cups of
coee have been delivered. If this adjustment does not obtain
the desired result, turn the dial another click.
9.5 Tips for a hotter coee
For hotter coee, you should:
perform a rinse cycle before delivery by pressing the
button (B5), as described in section “9. making coee”;
warm the cups with hot water using the hot water function
(see section “11. Hot water”);
select the "high" coee temperature in the menu (see sec-
tion “7.8 Setting the temperature”).
9.6 Making coee using coee beans
Important!
Do not use caramelised or candied coee beans as they could
stick to the coee mill and make it unusable.
1. Fill the container (A7) (g. 12) with coee beans;
2. Place under the coee spouts (A13):
- 1 cup, if you want to make 1 coee (g. 9);
- 2 cups if you want 2 coees.
3. Lower the spouts as near as possible to the cup. This makes
a creamier coee (g. 13);
4. Press the button corresponding to the number of coees
required (1 cup B7 or 2 cups B8) (gs. 10 and
14);
5. Preparation begins. The amount of coee selected appears
on the display (B1) together with a progress bar which
gradually lls as preparation progresses.
Please note:
While the machine is making coee, delivery can be inter-
rupted at any moment by pressing any button.
At the end of delivery, to increase the quantity of coee in
the cup, just press and hold (within 3 seconds) one of the
coee buttons ( or ).
Once the coee has been made, the appliance is ready to make
the next drink.
Please note:
Various alarm messages could be displayed while using
the appliance (FILL TANK, EMPTY GROUNDS CONTAINER,
ETC.). Their meaning is explained in section “17. Displayed
messages”.
For hotter coee, see section “9.5 Tips for a hotter coee.
If the coee is delivered a drop at a time, too weak and not
creamy enough or too cold, read the tips in section “18.
Troubleshooting”.
9.7 Making coee using pre-ground coee
Important!
Never add pre-ground coee when the machine is o or it
could spread through the inside of the machine and dirty
it. This could damage the appliance.
Never use more than 1 level
measure (C2) or it could dirty the
inside of the coee machine or
block the funnel (A6).
Please note:
If you use pre-ground coee, you can only make one cup of
coee at a time.
1. Press the button (B6) (g. 8) until "Pre-ground"
appears on the display (B1).
2. Make sure the funnel is not blocked, then add one level
measure of pre-ground coee (g. 15).
3. Place a cup under the coee spouts (A13) (g. 9).
1) To enable this function, press the button (B5).
"RINSING, Please wait" appears on the display (B1);
2) After a few seconds, hot water is delivered rst from the
coee spouts, then from the hot water spout (if inserted)
to clean and heat the appliances internal circuit. "RINSING"
appears on the display, together with a progress bar which
lls gradually as preparation proceeds;
3) To stop the process press any button or wait for delivery of
water to stop automatically.
Please note!
If the appliance is not used for more than 3-4 days, when
switched on again, we strongly recommend performing
2/3 rinses before use;
After cleaning, it is normal for the coee grounds container
(A13) to contain water.
9. MAKING COFFEE
9.1 Selecting the coee taste
The appliance is set by default to make coee with a standard
taste.
You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the aroma selection button
(B6) (g. 8) repeatedly until the required taste appears on the
display (B1).
9.2 Selecting the quantity of coee in the cup
The appliance is set by default to make a standard quantity of
coee. To select the quantity of coee, turn the selection dial
(B2) (g. 7) until the message corresponding to the required
quantity of coee appears on the display (B1):
Coee selected Quantity in cup
(. oz.) /(ml)
MY COFFEE Programmable:
from 0,62/20
to 6,07/180
SHORT
1,35/40
STANDARD
2,03/60
LONG
3,04/90
EXTRA LONG
4,06/120
Loading ...
Loading ...
Loading ...