Loading ...
Loading ...
Loading ...
14
10.6 Cleaning the milk container after use
Important! Danger of burns
When cleaning the internal tubes of the milk container (D), a
little hot water and steam leak out of the milk spout (D5). Avoid
contact with splashes of water.
"SET DIAL TO CLEAN" appears on the display (B1) each time you
use a milk function. To eliminate all milk residues, proceed as
follows:
1. Leave the milk container (D) in the machine (you do not
need to empty it);
2. Place a cup or other recipient under the frothed milk spout
(g. 21);
3. Turn the froth adjustment dial (D1) to "CLEAN" (g. 23). A
progress bar appears on the display and gradually lls as
the operation proceeds together with the message "Clean-
ing underway, Please wait". Cleaning stops automatically;
4. Turn the dial back to one of the froth selections;
5. Remove the milk container and always clean the steam
connection nozzle (A12) with a sponge (g. 24).
Please note!
• To prepare a number of cappuccinos or milk-based coees,
clean the milk container after you have prepared the last
drink only.
• The milk container can be kept in the refrigerator.
• In some cases, before cleaning you must wait for the appli-
ance to heat up.
10.7 Programming the quantity of coee and
milk in the cup for cappuccino or milk
The appliance is set by default to automatically deliver standard
quantities. To change these quantities, proceed as follows:
1. Place a cup under the coee spouts (A13) and milk spout
(D5) (g. 21);
2. Press and hold the CAPPUCCINO BUTTON B10 until the
message "PROGRAM MILK Program Quantity" appears on
the display (B1);
3. Release the button. The appliance starts delivering milk;
4. Once the required quantity of milk has been delivered into
the cup, press the CAPPUCCINO button again;
5. The appliance stops delivering milk and after a few seconds
the coee is delivered into the cup. "PROGRAM COFFEE Pro-
gram quantity" is displayed;
6. Once the required quantity of coee has been delivered
into the cup, press the CAPPUCCINO button again. Coee
delivery stops.
The machine is now reprogrammed with the new milk and cof-
fee quantities.
4. Press the 1 cup coee button (B7)(g. 10).
5. Preparation begins. The amount of coee selected appears
on the display together with a progress bar which gradual-
ly lls as preparation progresses.
Please note:
If "Energy Saving" mode is active, you may have to wait a few
seconds before the rst coee is delivered.
10. MAKING CAPPUCCINOS AND MILKBASED
COFFEES
Please note:
• To avoid milk with poor froth or large bubbles, always clean
the milk container lid (D2) and hot water connection noz-
zle (A12) as described in sections “10.6 Cleaning the milk
container after use”, “12.10 Cleaning the milk container”
and “12.11 Cleaning the hot water/steam connection
nozzle”.
10.1 Filling and attaching the milk container
1. Remove the lid (D2) (g. 16);
2. Fill the milk container (D3) with a sucient quantity of
milk, not exceeding the MAX level marked on the contain-
er (g. 17). Each mark on the side of the container corre-
sponds to 100ml of milk;
Please note:
• For a denser more even froth, you must use skimmed or
partially skimmed milk at refrigerator temperature (about
5°C).
• If "Energy Saving" mode is enabled, you may have to wait
a few seconds before the rst cappuccino is delivered.
3. Make sure the milk intake tube (D4) is correctly inserted in
the bottom of the milk container lid (g. 18);
4. Place the lid back on the milk container;
5. Remove the hot water spout (C6) from the connection noz-
zle (A12) (g. 19);
6. Attach the container to the connection nozzle and push
as far as it will go (g. 20). The machine emits a beep (if
enabled);
7. Place a suciently large cup under the coee spouts (A13)
and frothed milk spout (D5). Adjust the length of the milk
spout. To move it nearer the cup, simply pull it downwards
(g. 21);
8. Follow the instructions below for each function.
10.2 Adjusting the amount of froth
Turn the froth adjustment dial (D1) to adjust the amount of froth
on the milk delivered while making cappuccinos and milk-based
coees.
Dial
position
Description Recommended for…
No froth HOT MILK
Min. froth
CAPPUCCINO /
LATTE MACCHIATO /
FROTHED MILK
Max. froth
10.3 Making cappuccino or latte macchiato
1. After attaching the milk container (D), turn the froth ad-
justment dial (D1) on the milk container lid (D2) to the
required position (g. 22);
2. Press the CAPPUCCINO button (B10). "CAPPUCCINO" ap-
pears on the display (B1), together with a progress bar
which lls gradually as preparation proceeds;
3. After delivering the milk, the machine automatically
makes the coee.
Please note:
• If during delivery you want to stop making milk or coee,
press the CAPPUCCINO button twice.
• At the end of delivery, to increase the quantity of milk or
coee in the cup press and hold (within 3 seconds) the
CAPPUCCINO button.
• Do not leave the milk container out of the refrigerator for
long periods. The warmer the milk (5°C is ideal), the poorer
the quality of froth produced.
10.4 Making frothed milk (without coee)
Proceed as described in the previous section “10.3 Making cap-
puccino or latte macchiato”), pressing the CAPPUCCINO button
(B10) twice instead of once.
Please note:
If during delivery you want to stop preparation, press the CAP
PUCCINO button once.
10.5 Preparing milk (unfrothed and without
coee)
Proceed as described in the previous section (“10.4 Making
frothed milk (without coee)”), turning the froth adjustment
dial (D1) to the position.
Loading ...
Loading ...
Loading ...