Loading ...
Loading ...
Loading ...
15
10.6 Cleaning the milk container after use
Important! Danger of burns
When cleaning the internal tubes of the milk container (D), a
little hot water and steam leak out of the milk spout (D5). Avoid
contact with splashes of water.
"SET DIAL TO CLEAN" appears on the display (B1) each time you
use a milk function. To eliminate all milk residues, proceed as
follows:
1. Leave the milk container (D) in the machine (you do not
need to empty it);
2. Place a cup or other recipient under the frothed milk spout
(g. 21);
3. Turn the froth adjustment dial (D1) to "CLEAN" (g. 23). A
progress bar appears on the display and gradually lls as
the operation proceeds together with the message "Clean-
ing underway, Please wait". Cleaning stops automatically;
4. Turn the dial back to one of the froth selections;
5. Remove the milk container and always clean the steam
connection nozzle (A12) with a sponge (g. 24).
Please note!
• To prepare a number of cappuccinos or milk-based coees,
clean the milk container after you have prepared the last
drink only.
• The milk container can be kept in the refrigerator.
• In some cases, before cleaning you must wait for the appli-
ance to heat up.
10.7 Programming the quantity of coee and
milk in the cup for cappuccino or milk
The appliance is set by default to automatically deliver standard
quantities. To change these quantities, proceed as follows:
1. Place a cup under the coee spouts (A13) and milk spout
(D5) (g. 21);
2. Press and hold the CAPPUCCINO BUTTON B10 until the
message "PROGRAM MILK Program Quantity" appears on
the display (B1);
3. Release the button. The appliance starts delivering milk;
4. Once the required quantity of milk has been delivered into
the cup, press the CAPPUCCINO button again;
5. The appliance stops delivering milk and after a few seconds
the coee is delivered into the cup. "PROGRAM COFFEE Pro-
gram quantity" is displayed;
6. Once the required quantity of coee has been delivered
into the cup, press the CAPPUCCINO button again. Coee
delivery stops.
The machine is now reprogrammed with the new milk and cof-
fee quantities.
11. HOT WATER
Important! Danger of burns.
Never leave the machine unattended while delivering hot water.
The hot water spout (C6) becomes hot during delivery. Hold by
the handle only.
1. Make sure the hot water spout is attached correctly;
2. Place a container under the spout (as close as possible to
avoid splashes);
3. Press the button (B9) (g. 4). "HOT WATER" appears
on the display (B1), together with a progress bar which lls
gradually as preparation proceeds;
4. The machine delivers about 8,45 .oz./250ml of hot water,
then delivery stops automatically. To interrupt delivery of
hot water manually, press the button again.
Please note:
If "Energy Saving" mode is active, you may have to wait a few
seconds before hot water is delivered.
11.1 Changing the quantity of water delivered
automatically
The machine is set by default to automatically deliver about
250ml of hot water. To modify these quantities, proceed as
follows:
1. Position a container under the hot water spout (C6);
2. Press and hold the button (B9) until "HOT WATER
Program Quantity" appears on the display (B1), then re-
lease the button.
3. When the hot water in the cup reaches the required level,
press the button again.
The machine is now reprogrammed with the new quantity.
12. CLEANING
12.1 Cleaning the machine
The following parts of the machine must be cleaned regularly:
- the appliance’s internal circuit;
- coee grounds container (A14);
- drip tray (A18) and condensate tray (A15);
- water tank (A9);
- coee spouts (A13);
- pre-ground coee funnel (A6);
- infuser (A11), accessible after opening the infuser door
(A10);
- milk container (D);
- hot water/steam connection nozzle (A12);
Important!
• Do not use solvents, abrasive detergents or alcohol to clean
the coee machine. With De’Longhi superautomatic coee
10.2 Adjusting the amount of froth
Turn the froth adjustment dial (D1) to adjust the amount of froth
on the milk delivered while making cappuccinos and milk-based
coees.
Dial
position
Description Recommended for…
No froth HOT MILK
Min. froth
CAPPUCCINO /
LATTE MACCHIATO /
FROTHED MILK
Max. froth
10.3 Making cappuccino or latte macchiato
1. After attaching the milk container (D), turn the froth ad-
justment dial (D1) on the milk container lid (D2) to the
required position (g. 22);
2. Press the CAPPUCCINO button (B10). "CAPPUCCINO" ap-
pears on the display (B1), together with a progress bar
which lls gradually as preparation proceeds;
3. After delivering the milk, the machine automatically
makes the coee.
Please note:
• If during delivery you want to stop making milk or coee,
press the CAPPUCCINO button twice.
• At the end of delivery, to increase the quantity of milk or
coee in the cup press and hold (within 3 seconds) the
CAPPUCCINO button.
• Do not leave the milk container out of the refrigerator for
long periods. The warmer the milk (5°C is ideal), the poorer
the quality of froth produced.
10.4 Making frothed milk (without coee)
Proceed as described in the previous section “10.3 Making cap-
puccino or latte macchiato”), pressing the CAPPUCCINO button
(B10) twice instead of once.
Please note:
If during delivery you want to stop preparation, press the CAP
PUCCINO button once.
10.5 Preparing milk (unfrothed and without
coee)
Proceed as described in the previous section (“10.4 Making
frothed milk (without coee)”), turning the froth adjustment
dial (D1) to the position.
Loading ...
Loading ...
Loading ...