Loading ...
Loading ...
Loading ...
English 39
Electric oven
Draining
When a steam function is complete, you must drain the remaining water to prevent
the water from affecting other cooking modes.
To perform the draining cycle
1. Make sure the oven door is unlocked
and closed completely.
2. Turn the mode and temperature
selector knobs to the OFF position.
Turn the mode selector knob from
OFF to the Clean position.
3. Press <, > to select Drain mode.
4. Press OK to start draining. The oven
drains water from the steam generator
to the water reservoir.
5. When draining is complete, use oven
gloves to remove and empty the water
reservoir.
Mode Selector Knob
Clean Mode
Drain
NOTE
Once the oven starts draining, please wait until the draining cycle is complete.
WARNING
Use only descaling agents that are specic to steam ovens or coffee machines.
CAUTION
• Running the Descaling function disables Steam Bake. Do not cancel descaling
while it is in process. If you stop it, you must restart the descaling cycle and
complete it within the next three hours to re-enable the Steam Bake function.
• To avoid accidents, keep children away from the oven.
• For the correct ratio of water and the descaling agent, follow the agent
manufacturer’s instructions. If the ratio of water to descaling agent differs
from the instructions here (8 to 1), use the ratio indicated in the instructions
for the descaling agent.
NOTE
Although the oven automatically starts descaling in 5 seconds without your
conrmation, we recommend that you conrm your selection. This is to prevent
descaling from starting by mistake.
NY9900R_CHEF_NY36R9966PS_AA_DG68-01105B-00_EN+MES+CFR.indb 39 2019-02-06 1:26:33
Loading ...
Loading ...
Loading ...