Loading ...
Loading ...
Loading ...
261Fuses and bulbs
Note
For LED pilots, you can only change the fog or reverse bulb, on the left or
right guide.
Fitting the bulb holder
– Install the bulb holder making sure that locking clips ⇒ Fig. 147
A
are properly clipped on.
– Replace the cover of the rear lid lining ⇒ Fig. 146.
Changing number plate light bulbs
1)
Fig. 149 In the rear
bumper: number plate
light
Fig. 150 Number plate
light: remove the bulb
holder
Follow the steps indicated:
1. Press the number plate light in the direction of the arrow
⇒ Fig. 149.
2. Remove the number plate bulb slightly.
3. In the connector lock, turn ⇒ Fig. 150 towards arrow
A
and pull
the connector.
4. Rotate the bulb holder in the direction of arrow
B
and extract it
with the bulb.
5. Replace the defective bulb with a new bulb with the same fea-
tures.
6. Insert the bulb holder in the number plate light and turn in the
opposite direction of arrow
B
until it stops.
1)
Depending on how equipped the vehicle is, the number plate lights may be LEDs. LEDs
have an estimated life that exceeds than that of the car. If a light with LEDs fails, go to an
authorised workshop for replacement.
Safety First Operating instructions Practical Tips Technical specifications
Loading ...
Loading ...
Loading ...