Loading ...
Loading ...
Loading ...
238 Emergencies
WARNING
Slightly loosen the wheel bolts (one turn) before raising the vehicle with
the jack*. If not, an accident may occur.
Raising the vehicle
Fig. 123 Crossbar:
makes
Fig. 124 Strut: mount-
ing the jack on the ve-
hicle
– Place the jack* (vehicle tools) on a firm surface. If necessary use
a large, strong board or similar support. If the surface is slip-
pery (for example, tiles), use a non-slip base underneath the
jack (for example, a rubber mat) ⇒
.
– Find the support point on the strut (sunken area) closest to the
wheel to be changed ⇒ Fig. 123. The jack* support point is be-
hind the mark on the strut.
– Turn the jack*, located below the strut support point, to raise it
until tab
A
⇒ Fig. 124 is below the plastic housing.
– Align the jack* so that tab
A
"grips" onto the plastic housing
on the strut and the mobile base plate
B
is resting on the
ground. The base plate
B
should fall vertically with respect to
the support point
A
.
– Continue turning the jack* until the wheel is slightly lifted off
the ground.
Loading ...
Loading ...
Loading ...