Loading ...
Loading ...
Loading ...
ing interference that may cause undesired
operation of the device."
Diagnostics connection
The diagnostics connection is used for con-
necting diagnostic equipment at a qualified
specialist workshop.
G
WARNING
If you connect equipment to a diagnostics
connection in the vehicle, it may affect the
operation of vehicle systems. As a result,
the operating safety of the vehicle could be
affected. There is a risk of an accident.
Only connect equipment to a diagnostics
connection in the vehicle, which is approved
for your vehicle by Mercedes-Benz.
G
WARNING
Objects in the driver's footwell may restrict
the clearance around the pedals or block a
depressed pedal. This jeopardizes the oper-
ating and road safety of the vehicle. There is
a risk of an accident.
Stow all objects securely in the vehicle so
that they do not get into the driver's foot-
well. When using floormats or carpets, make
sure that they are properly secured so that
they do not slip or obstruct the pedals. Do
not place several floormats or carpets on
top of one another.
!
If the engine is switched off and equip-
ment on the diagnostics connection is used,
the starter battery may discharge.
Connecting equipment to the diagnostics con-
nection can lead to emissions monitoring
information being reset, for example. This may
lead to the vehicle failing to meet the require-
ments of the next emissions test during the
main inspection.
Qualified specialist workshop
An authorized Mercedes-Benz Center is a
qualified specialist workshop. It has the neces-
sary specialist knowledge, tools and qualifica-
tions to correctly carry out the work required
on your vehicle. This is especially the case for
work relevant to safety.
Observe the notes in the Maintenance Book-
let.
Always have the following work carried out at
an authorized Mercedes-Benz Center:
R
work relevant to safety
R
service and maintenance work
R
repair work
R
alterations, installation work and modifica-
tions
R
work on electronic components
Correct use
If you remove any warning stickers, you or oth-
ers could fail to recognize certain dangers.
Leave warning stickers in position.
Observe the following information when driv-
ing your vehicle:
R
the safety notes in this manual
R
technical data for the vehicle
R
traffic rules and regulations
R
laws and safety standards pertaining to
motor vehicles
Information about the REACH regula-
tion
The REACH regulation (Regulation (EC) no.
1907/2006, Article 33) lays down an informa-
tion obligation for substances of very high con-
cern (SVHC).
Daimler AG acts in good faith to avoid using
these SVHCs and to allow the customer to
handle these substances safely. In accordance
with supplier information and internal product
information from Daimler AG, SVHCs that
account for more than 0.1 percent by weight
of individual products in this vehicle are
known.
More detailed information can be found at the
following addresses:
R
http://www.daimler.com/reach (German
version)
R
http://www.daimler.com/reach/en
(English version)
Operating safety
27
Introduction
Z
Loading ...
Loading ...
Loading ...