Loading ...
Loading ...
Loading ...
make sure that new batteries have been
installed in garage door drive remote control
A.
R
Note that some remote controls only trans-
mit for a limited amount of time (the indica-
tor lamp on the remote control goes out).
Press button B on remote control A again
before transmission ends.
R
Align the antenna cable of the garage door
opener unit. This can improve signal recep-
tion/transmission.
Opening/closing the garage door
After it has been programmed, the integrated
garage door opener performs the function of
the garage door system remote control. Please
also read the operating instructions for the
garage door system.
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 118).
X
Press either button ;, = or ? which you
have programmed to operate the garage
door.
Garage door system with a fixed code: indi-
cator lamp : lights up green.
Garage door system with a rolling code: indi-
cator lamp : flashes green.
The transmitter will transmit a signal as long
as the button is pressed. The transmission
is halted after a maximum of ten seconds
and indicator lamp : lights up yellow.
X
Press button ;, = or ? again if neces-
sary.
Clearing the memory
Make sure that you clear the memory of the
integrated garage door opener before selling
the vehicle.
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 118).
X
Press and hold buttons ; and ?.
The indicator lamp initially lights up yellow
and then green.
X
Release buttons ; and ?.
The memory of the integrated garage door
opener in the rear-view mirror is cleared.
Compass
Calling up the compass
Compass ; displays the compass direction in
which the vehicle is currently traveling: NN, NENE,
EE, SESE, SS, SWSW, WW or NWNW.
To receive a correct display in rear-view mir-
ror :, the compass must be calibrated and
the magnetic field zone set.
Features
237
Stowage and features
Z
Loading ...
Loading ...
Loading ...