Loading ...
Loading ...
Loading ...
Customer Assistance Center. The customer
service representative can use the received
data to decide what kind of assistance is
required. You are then, for example, guided to
the nearest Mercedes-Benz Service Center or
a recovery vehicle is called.
If vehicle data needs to be transferred during
an MB Info call or a Roadside Assistance call,
this is initiated by the Customer Assistance
Center. You will see the Roadside Assis‐Roadside Assis‐
tance Connectedtance Connected message in the COMAND
display. If the Vehicle Health Check can be
started, the Request for vehicle diagno‐Request for vehicle diagno‐
sis received. Start vehicle diagno‐sis received. Start vehicle diagno‐
sis?sis? message appears in the display.
X
Confirm the message with YesYes.
X
When the Vehicle Diagnosis: Please
Vehicle Diagnosis: Please
start ignition.start ignition. message appears, turn
the SmartKey to position 2 in the ignition
lock (Y page 118).
X
When the Please follow the instruc‐Please follow the instruc‐
tions received by phone and movetions received by phone and move
your vehicle to a safe positionyour vehicle to a safe position mes-
sage appears, follow the customer service
representative's instructions.
The message in the display disappears.
If you select CancelCancel the Vehicle Health
Check is canceled completely.
The vehicle operating state check begins.
You will see the Vehicle diagnosisVehicle diagnosis
activated.activated. message.
When the check is completed, the SendSend
vehicle diagnostics data (Voice con‐vehicle diagnostics data (Voice con‐
nection may be interrupted duringnection may be interrupted during
data transfer)data transfer) message appears. The vehi-
cle data can now be sent to the Customer
Assistance Center.
X
Press OKOK to confirm the message.
The voice connection with the Customer
Assistance Center is terminated.
You will see the Vehicle Diagnosis:Vehicle Diagnosis:
Transferring data...
Transferring data... message.
The vehicle data is sent to the Customer
Assistance Center.
Depending on what the customer service rep-
resentative agreed with you, the voice connec-
tion is re-established after the transfer is com-
plete. If necessary, you will be contacted at a
later time by another means, e.g. by e-mail or
phone.
Another function of the Vehicle Health Check
is the transfer of service data to the Customer
Assistance Center. If a service is overdue, the
COMAND display shows a message about vari-
ous special offers at your workshop.
USA only: this information can also be called
up under "Owners Online" at http://
www.mbusa.com.
Information on the data stored in the vehicle
(Y page 28).
Information on Roadside Assistance
(Y page 25).
Garage door opener
General notes
The HomeLink
®
garage door opener integrated
in the rear-view mirror allows you to operate
up to three different door and gate systems.
Use the integrated garage door opener only on
garage doors that:
R
have safety stop and reverse features and
R
meet current U.S. federal safety standards
Once programed, the integrated garage door
opener in the rear-view mirror will assume the
function of the garage door system's remote
control. Please also read the operating instruc-
tions for the garage door system.
When programming a garage door opener,
park the vehicle outside the garage. Do not
run the engine while programming.
Certain garage door drives are incompatible
with the integrated garage door opener. If you
have difficulty programing the integrated
garage door opener, contact an authorized
Mercedes-Benz Center.
Alternatively, you can call the following tele-
phone assistance services:
R
USA: Mercedes-Benz Customer Assistance
Center at 1-800-FOR-MERCedes
R
Canada: Customer Service at
1-800-387-0100
R
HomeLink
®
hotline 1-800-355-3515 (free of
charge)
More information on HomeLink
®
and/or com-
patible products is also available online at
http://www.homelink.com.
Notes on the declaration of conformity
(Y page 26).
USA: FCC ID: CB2HMIHL4
Canada: IC: 279B-HMIHL4
234
Features
Stowage and features
Loading ...
Loading ...
Loading ...