Loading ...
Loading ...
Loading ...
The high-beam headlamps are switched on
automatically. The K indicator lamp in
the instrument cluster also lights up.
If you are driving at speeds below approx-
imately 16 mph (25 km/h) or other road
users have been detected or the roads are
adequately lit:
The high-beam headlamps are switched off
automatically. The K indicator lamp in
the instrument cluster goes out. The _
indicator lamp in the multifunction display
remains lit.
X
To switch off: move the combination
switch back to its normal position or move
the light switch to another position.
The _ indicator lamp in the multifunction
display goes out.
Interior lighting
Overview of interior lighting
Overhead control panel
:
p Switches the left-hand reading lamp
on/off
;
| Switches the automatic interior light-
ing control on/off
=
p Switches the right-hand reading lamp
on/off
?
c Switches the interior lighting on/off
Interior lighting control
General notes
In order to prevent the vehicle's battery from
discharging, the interior lighting functions are
automatically deactivated after some time,
unless the SmartKey is in position 2 in the
ignition lock.
The color and brightness of the ambient light-
ing are set via the multimedia system
(Y page 177).
Automatic interior lighting control
X
To switch on: set the switch to the center
position.
When the automatic interior lighting control
is switched on, the switch is flush with the
overhead control panel.
X
To switch off: set the switch to the |
position.
The interior lighting automatically switches on
if you:
R
unlock the vehicle
R
open a door
R
remove the SmartKey from the ignition lock
The interior lighting is switched on for a set
time when the SmartKey is removed from the
ignition lock. You can activate this delayed
switch-off using the on-board computer
(Y page 177).
Replacing bulbs
Important safety notes
G
WARNING
Bulbs, lamps and connectors can get very
hot when operating. If you change a bulb,
you could burn yourself on these compo-
nents. There is a risk of injury.
Allow these components to cool down
before changing a bulb.
Vehicles with halogen lamps
Do not use a lamp that has been dropped or if
its glass tube has been scratched.
The lamp may explode if:
R
you touch it
R
it is hot
R
you drop it
R
you scratch it
Only operate bulbs in enclosed lamps
designed for that purpose. Only install spare
Replacing bulbs
101
Lights and windshield wipers
Z
Loading ...
Loading ...
Loading ...