Loading ...
Loading ...
Loading ...
bulbs of the same type and the specified volt-
age.
Marks on the glass tube reduce the service life
of the bulbs. Do not touch the glass tube with
your bare hands. If necessary, clean the glass
tube when cold with alcohol or spirit and rub it
off with a lint-free cloth.
Protect bulbs from moisture during operation.
Do not allow bulbs to come into contact with
liquids.
Only replace the lamps listed (Y page 102).
Have the bulbs that you cannot replace your-
self replaced at a qualified specialist work-
shop.
If you require assistance replacing lamps, con-
sult a qualified specialist workshop.
If the new lamp still does not light up, consult
a qualified specialist workshop.
Bulbs and lamps are an important aspect of
vehicle safety. You must therefore make sure
that these function correctly at all times. Have
the headlamp setting checked regularly.
Vehicles with LED headlamps
The front and rear light clusters of your vehicle
are equipped with LED light bulbs. Do not
replace the bulbs yourself. Contact a qualified
specialist workshop which has the necessary
specialist knowledge and tools to carry out the
work required.
Overview: replacing bulbs/bulb
types
Halogen headlamps
:
Low-beam headlamp: H7 55 W
;
High-beam headlamp: H7 55 W
Replacing the front bulbs
Removing/mounting the cover in the
front wheel housing
X
To remove: switch off the lights.
X
Turn the front wheels inwards.
X
Slide cover : up and remove it.
X
To install: reinsert cover : and slide it
down until it engages.
Low-beam headlamps (halogen head-
lamps)
X
Remove the cover in the front wheel hous-
ing (Y page 102).
X
Turn housing cover : counter-clockwise
and pull it out.
X
Push bar ; upwards.
X
Remove connector = with the bulb.
X
Pull the bulb out of connector =.
X
Insert the new bulb into connector = and
place in the bracket of bar ;.
Make sure that the bulb is positioned cor-
rectly.
X
Push bar ; downwards.
102
Replacing bulbs
Lights and windshield wipers
Loading ...
Loading ...
Loading ...