Loading ...
Loading ...
Loading ...
11
i
192
PRACTICAL INFORMATION
BATTERY
Procedure for charging your battery
when it is fl at or for starting the engine
using another battery.
Access to the battery
Disconnecting/Reconnecting
the cables
Raise the locking plate 1 fully.
Position the open clip of the cable
on the positive terminal (+) of the
battery.
Press vertically on the clip 2 to
position it correctly against the
battery.
Lock the clip by lowering the plate 1 .
Starting using another battery
Do not force the plate as locking is
impossible if the clip is positioned
incorrectly.
Start the procedure again.
Connect the red cable to the positive
terminal (+) of the fl at battery A ,
then to the positive terminal (+) of
the slave battery B .
The battery is located under the bonnet.
To gain access to it:
open the bonnet using the interior
release lever, then the exterior
safety catch,
secure the bonnet stay,
remove the plastic cover to gain
access to the two terminals,
unclip the fuse box to remove the
battery, if necessary.
Loading ...
Loading ...
Loading ...