Loading ...
Loading ...
Loading ...
11
i
173
PRACTICAL INFORMATION
CHANGING A WHEEL
Procedure for changing a
faulty wheel for the spare
wheel using the tools pro-
vided with the vehicle.
The wheelbrace 1 is installed in the boot
left-hand side trim.
The tools 2 and 3 are installed in a box,
in the centre of the spare wheel, placed
underneath the vehicle.
To gain access to them:
open the boot,
open the access fl ap in the left-hand
side trim,
remove the wheelbrace from its
support,
refer to the paragraph "Access to
the spare wheel" on the next page
to retrieve the other tools.
Access to the tools
List of tools
Wheel with trim
When removing the wheel , detach the trim fi rst using the wheelbrace 1 pulling
at the valve passage hole.
When refi tting the wheel , refi t the trim starting by placing its notch facing the
valve and press around its edge with the palm of your hand.
All of these tools are specifi c to your
vehicle. Do not use them for other pur-
poses.
1. Wheelbrace.
For removal of the wheel trim and
removal of the wheel fi xing bolts.
2. Jack with integral handle.
For raising the vehicle.
3. Socket for the security bolts
(located in the glove box).
For adaptation of the wheelbrace
to the special security bolts.
Loading ...
Loading ...
Loading ...