Loading ...
Loading ...
Loading ...
11
i
i
166
PRACTICAL INFORMATION
If after around 5 to 7 minutes the
pressure is not attained, this indi-
cates that the tyre is not repairable;
contact a PEUGEOT dealer for as-
sistance.
Switch on the compressor by moving
the switch B to position "1" until the
tyre pressure reaches 2.0 bars.
Remove the kit, taking care to avoid
to avoid staining your vehicle with
traces of fl uid. Keep the kit to hand.
Drive immediately for approximately
three miles (fi ve kilometres), at
reduced speed (between 15 and
35 mph [20 and 60 km/h]), to plug
the puncture.
Stop to check the repair and the tyre
pressure using the kit.
Turn the selector A to the AIR
position.
Connect the black pipe D to the
valve of the wheel.
You can use this kit for the routine
check and adjustment of the tyre
pressures on your vehicle. It can
also be used to infl ate other items
such as a ball or bicycle tyre.
To do this, turn the selector to the
"AIR" position, connect the black
pipe with the appropriate adapter
to the item to be infl ated, then fol-
low the remainder of the procedure
below until the kit is removed.
Loading ...
Loading ...
Loading ...