www.warmlite.co
1500W CERAMIC FLAME EFFECT FAN HEATER
WL44018
YOUR SAFETY &
INSTRUCTION MANUAL
PLEASE READ CAREFULLY
This product is only suitable for well insulated spaces or occasional use
2
CUSTOMER SUPPORT TEAM: +44 (0) 333 220 6056
WHAT’S IN THE BOX
Instruction Manual
Ceramic Flame Eect Fan Heater
1. LED Flame eect
2. Mode selection dial
3. Temperature control dial
4. Stand
5. Air outlet
6. High heat setting
7. Low heat setting
8. Flame eect only setting
9. Power OFF
10. Temperature control dial
1
2
3
4
5
TECHNICAL DATA
Description: 1500W Ceramic Flame Eect Fan Heater
Model: WL44018
Rated Voltage: 220-240V
Frequency: 50Hz
Power Consumption: 1500W
DOCUMENTATION
We declare that this product conforms to the following product legislation in accordance with the following directive(s):
2014/30/EU Electromagnetic Compatibility Directive.
2014/35/EU Low Voltage Directive.
2011/65/EU Restriction of Hazardous Substances Directive.
2009/125/EC Eco-Design of Energy Related Products.
RK Wholesale LTD Quality Assurance, United Kingdom
6 7 8 109
3
www.warmlite.co
DISPOSAL OF THE UNIT
Appliances bearing the symbol shown here may not be disposed of in domestic rubbish.
You are required to dispose of old electrical and electronic appliances like this separately.
Please visit www.recycle-more.co.uk or www.recyclenow.co.uk for access to information about the
recycling of electrical items.
Please visit www.weeeireland.ie for access to information about the recycling of
electrical items purchased in Ireland.
The WEEE directive, introduced in August 2006, states that all electrical items must be
recycled, rather than taken to landll.
Please arrange to take this appliance to your local Civic Amenity site for recycling,
once it has reached the end of its life.
WIRING SAFETY FOR UK USE ONLY
IMPORTANT
As the colours in the mains lead of this appliance
may not correspond with the coloured markings
identifying the terminals in your plug, please
proceed as follows:
The wires in the mains lead are coloured in
accordance with the following code:
Blue neutral [N] Brown live [L]
Plug Fitting Details (Where Applicable).
The wire coloured blue is the neutral and must
be connected to the terminal marked [N] or
coloured black.
The wire coloured brown is the live wire and
must be connected to the terminal marked [L] or
coloured red.
On no account must either the brown or the blue
wire be connected to the [EARTH] terminal .
Always ensure that the cord grip is fastened
correctly.
The plug must be tted with a fuse of the same
rating already tted and conforming to BS 1362
and be ASTA approved.
If in doubt consult a qualied electrician who will
be pleased to do this for you.
Non-Rewireable Mains Plug.
If your appliance is supplied with a non-
rewireable plug tted to the mains lead and
should the fuse need replacing, you must use an
ASTA approved one (conforming to BS 1362 of
the same rating).
If in doubt, consult a qualied electrician who will
be pleased to do this for you.
If you need to remove the plug – disconnect
it from the mains – and then cut it o of the
mains lead and immediately dispose of it in a
safe manner. Never attempt to reuse the plug or
insert it into a socket outlet as there is a danger
of an electric shock.
Fuse
Neutral
(Blue)
Live
(Brown)
WARNING:
This appliance is double insulated.
Do not connect any wire to the earth terminal.
4
CUSTOMER SUPPORT TEAM: +44 (0) 333 220 6056
PRODUCT SAFETY
When using any electrical appliance, basic safety precautions should
always be followed including the following:
• Check that the voltage of the
main circuit corresponds with
the rating of the appliance
before operating.
• Please ensure that the
appliance is used on a
stable, level, and heat
resistant surface.
• DO NOT immerse cords,
plugs or any part of the
appliance in water or any
other liquid.
• DO NOT leave the appliance
unattended while it is
operating.
• Close supervision is
necessary when any
appliance is used by or near
children or pets.
• This appliance can be
used by children above 8
years old and persons with
reduced physical, sensory
or mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use of
the appliance in a safe way
and understand the hazards
involved.
• Children should not play with
the appliance.
• Children should not maintain
or clean the appliance unless
supervised.
• Switch o at the wall socket
then remove the plug from
the socket when not in use
or before cleaning.
• If the supply cord or
appliance is damaged,
stop using the appliance
immediately and seek advice
from the manufacturer or its
service agent or a similarly
qualied person.
• DO NOT let the cord hang
over the edge of a table
or counter or let it come
into contact with any hot
surfaces.
• The use of accessory
attachments is not
recommended by the
appliance manufacturer
apart from those supplied
with this product. DO NOT
use extension cords with the
appliance.
• DO NOT pull the plug out by
the cord as this may damage
the plug and/or the cable.
• DO NOT use this product
for anything other than its
intended use.
5
www.warmlite.co
• This appliance is for
household use only.
• DO NOT carry the appliance
by the power cord.
• Always ensure that the
heater is placed on a rm
level surface. Ensure that the
heater is not positioned close
to curtains, furniture or any
combustible materials as this
could create a re hazard.
• The heater must not be
located immediately below a
mains socket outlet.
• This product is only suitable
for well-insulated spaces and
occasional use.
• DO NOT cover the heater as
this may lead to a re risk.
• DO NOT obstruct any of
the openings of the heater
especially the heat outlet at
the bottom of the heater.
• DO NOT insert any object
through any openings on the
heater.
• DO NOT use the heater
in areas where ammable
liquids are stored or where
ammable fumes may be
present.
• DO NOT operate the heater
on a timer or leave on
overnight.
• When not being used, please
unplug the heater from the
mains socket.
• Keep the mains lead away
from the hot body of the
heater and ensure that it is
not pulled tight between the
socket and the heater.
• DO NOT use the heater in
the immediate surroundings
of a bath, a shower, a
swimming pool or similar
indoor locations.
• DO NOT use or place the
appliance on carpet. Always
place the heater on a at,
stable heat-resistant surface.
• In order to avoid a hazard
due to inadvertent resetting
of the thermal cut-out, this
appliance must not be
supplied through an external
switching device, such as
a timer, or connected to
a circuit that is regularly
switched on and o by the
utility.
6
CUSTOMER SUPPORT TEAM: +44 (0) 333 220 6056
• WARNING: This heater
is not equipped with a
device to control the room
temperature. DO NOT use
this heater in small rooms
when they are occupied
by persons not capable
of leaving the room on
their own, unless constant
supervision is provided
• CAUTION – Some parts of
this product can become
very hot and cause burns.
Particular attention has to
be given where children and
vulnerable people when
around the appliance. • DO
NOT use this appliance if it is
dropped or damaged in any
way.
• WARNING! This appliance
should only be repaired
by the manufacturer or
a qualied service repair
person.
• WARNING! DO NOT use
the appliance if water
damage has occurred, if
the appliance body has
been damaged, the power
cord has been damaged or
broken, if the power cord is
hot to the touch, if the unit
smokes or smells like smoke.
Note: When the heat function
is used for the rst time, a
slight odour may be present.
This is normal and may occur
again if the appliance is not
used for a long period of
time.
• Always unplug the heater
and allow it to cool before
moving it from one location
to another.
• DO NOT attempt to
dismantle or repair any part
of the heater. This should
only be done by a qualied
service agent.
• In the unlikely event the
appliance develops a fault,
stop using it immediately
and seek advice from the
Customer Support Team.
HIGH VOLTAGE HOT SURFACE DO NOT COVER
7
www.warmlite.co
BEFORE YOUR FIRST USE:
1. Remove your appliance from the packaging.
2. Keep the front of the appliance through which
the heat is radiated at least one meter away from
furniture, curtains and other ammable objects at
all times.
3. Ensure there is a grounded socket nearby (back of
the appliance).
4. Never use an extension lead. The main cable must
remain at the back of the appliance and must not
be in contact with any hot elements.
5. Your appliance is now ready for normal use.
6. Dispose of the packaging in a responsible manner.
USING YOUR APPLIANCE:
Turning the unit On and Off:
1. To power the unit on, rst plug it into an active
mains socket. The pilot light on the unit’s control
panel will come on to indicate the unit is plugged
in.
2. Once the unit has been plugged into the mains,
turn the heat selection dial to any position other
than 0 and the thermostat dial clockwise, away
from the ‘-‘ position, to turn it on. The temperature
dial will give o a clicking sound and air will start
emitting from the front grille to show the unit is in
operation.
WARNING! DO NOT touch the grille while the heater in
operation, as it will be very hot and there will be a risk
of burns.
3. To power the unit o, turn the heat selection dial
to the 0 position and the thermostat dial counter-
clockwise to the ‘-‘ position. The temperature
dial will give o a clicking sound and air will stop
emitting from the front grille to show the unit has
been powered down.
WARNING! DO NOT store the unit directly after turning
it o. Allow for time for the unit to cool down before
storing.
Mode Selection:
• This heater oers a choice of 2 heat settings - Low
(I) and High (II.
• Turn the mode selection dial counter-clockwise to
cycle between O (0), Flame, Low and High heat
settings. Turn this dial clockwise to cycle between
High heat, Low heat, Flame and O (0) settings.
• Turn the heat selection dial to the 0 position to turn
the unit o.
Heat Selection:
• This heater is equipped with an adjustable
thermostat, which allows for temperature control
within each of the 2 heat settings.
• Use the thermostat dial to manually increase
or lower the heating temperature. Turn this dial
clockwise away from the O position to increase
the temperature, or counter-clockwise towards the
O position to decrease it.
CHECK THAT YOU HAVE NOTED ALL THE
FOLLOWING INSTRUCTIONS:
• Never leave children unsupervised in a room where
the re is ON and unguarded.
• Never obstruct or cover the fan outlet or force
items into the re openings.
• Never install or use the re anywhere where water
is in use, i.e. bathrooms, kitchens, shower rooms,
swimming pools etc.
• Never use aerosols or steam cleaners on or
around the re.
• Never route the mains supply cable under carpet
etc.
• Never install the re close to curtains or
combustible materials.
• Never use the re to dry clothes etc.
• Never sit or stand on the re.
• Never cut the o the plug and hard wire into a
xed fused spur.
NOTE: When the re is turned on for the rst time
or when it has not been used for some time, it may
release a slight, harmless odour. This odour is a normal
occurrence caused by the initial heating of the internal
heating elements or dust, and will disappear with use.
TROUBLE SHOOTING
Safety Cut-Out devices:
To ensure against the potential hazard caused by
blockage of the air outlet, this unit is equipped with an
automatic overheat safety cut-out device and a built-in
tip over switch. When the device is activated the heater
will not operate. If this occurs, the unit can be reset using
the following procedure.
1. Turn the re o by depressing the on/o switch on
the unit.
2. Unplug the power cord form the electrical mains
supply socket and leave it disconnected for at
least 15 minutes.
3. Ensure that the air vents are free from obstruction.
4. Plug the power cord back into the mains socket.
5. Turn the re back on.
6. If the re fails to operate, check the fuse in the
plug.
7. If the fuse in the plug is OK and the re is still not
functioning, contact a qualied person.
8
CUSTOMER SUPPORT TEAM: +44 (0) 333 220 6056
Symptom Corrective action
The heater will not
turn on / The fan
will not turn on.
Make sure the appliance
is plugged into the
mains.
Make sure the Mode
selection dial is turned
to any position other
than 0.
Make sure the
temperature dial is not in
the O position.
Check that the safety
cut-o feature has not
been activated.
No re eect light Check with the
manufacturer or a
qualied service person
for repair
CLEANING AND CARE
WARNING! Always disconnect from the mains supply
before cleaning the wall re.
CAUTION! Allow the product to completely cool before
handling or cleaning it.
• To remove the dust, wipe the appliance with a dry
cloth.
• To keep the heater clean, the outer shell may be
cleaned with a soft, damp cloth. After cleaning, dry
the unit with a soft cloth.
• CAUTION! DO NOT let liquid enter the heater. This
may cause damage or deterioration to the heater’s
surface.
• WARNING! DO NOT immerse the heater in water
or any other liquid.
• Never use abrasives or detergents.
• If the heater shows any signs of wear or damage
disconnect immediately from the mains supply,
and do NOT use it – have it checked by a suitably
qualied person.
• This product does not use a standard bulb for its
ame eect. The appliance uses an electronically
controlled LED system to create the eect,
therefore no parts need to be replaced. There
are no user-serviceable parts on this appliance.
Under no circumstances should the appliance
be serviced be anyone other than a qualied
electrician.
STORING THE UNIT
WARNING! Always disconnect from the mains supply
before cleaning.
• Store in a cool, dry place, out of the reach of
children.
WARNING:
DO NOT IMMERSE ANY ELECTRICAL PART OF THE
APPLIANCE IN WATER SUCH AS MOTOR UNITS OR
PLUGS.
PLEASE SEE CLEANING SECTION FOR FURTHER
INSTRUCTIONS.
9
www.warmlite.co
Model Identifier(s): WL44018
Item Symbol Valve Unit Item Unit
Heat Output
Type of heat input for electric storage, local
space heaters only (select one)
Nominal heat
output
Pnom 1.5 kW
Manual heat charge with integrated
thermostat
No
Minimum heat
output (indicative)
Pmin N/A kW
Manual heat charge control with room
and/or outdoor temperature feedback
No
Maximum
continuous heat
output
Pmax, c N/A kW
Electronic heat charge control with
room
and/or outdoor temperature feedback
No
Auxiliary electricity
consumption
Fan assisted heat output No
At nominal heat
output
elmax N/A kW
Type of heat output/room temperature control
(select one)
At minimum heat
output
elmin N/A kW
Single stage heat output and no room
temperature control
No
In standby mode eISB N/A kW
Two or more manual stages, no room
temperature control
No
With mechanic thermostat room
temperature control
Yes
With electronic room temperature
control
No
Electronic room temperature control
plus day timer
No
Electronic room temperature control
plus week timer
No
Other control options (multiple selections
possible)
Room temperature control with pres-
ence detection
No
Room temperature control with open
window detection
No
With distance control option No
With adaptive start control No
With working time limitation No
With black bulb sensor No
Contact Details: Imported by RK Wholesale LTD., Berryhill Road, Stoke-on-Trent ST4 2NL
10
CUSTOMER SUPPORT TEAM: +44 (0) 333 220 6056
NOTES
11
www.warmlite.co
NOTES
0720.V1
Thank You!
We hope you enjoy your appliance for many years.
This product is guaranteed for 12 months from the date of original purchase.
If any defect arises due to faulty materials of workmanship, the faulty products must be returned to the
place of purchase.
Refund or replacement is at the discretion of the retailer.
The Following Conditions Apply:
The product must be returned to the retailer with proof of purchase or a receipt.
The product must be installed and used in accordance with the instructions contained in this instruction guide.
It must be used only for domestic purposes.
It does not cover wear and tear, damage, misuse or consumable parts.
RKW has limited liability for incidental or consequential loss or damage.
This guarantee is valid in the UK and Eire only.
The standard one year guarantee is only extended to the maximum available for each particular product upon
registration of the product within 28 days of purchase. If you do not register the product with us within the 28 day
period, your product is guaranteed for 1 year only.
To validate your extended warranty, please visit
www.warmlite.co and register with us online.
Please note that length of extended warranty oered is dependent on product type and that each qualifying
product needs to be registered individually in order to extend its warranty past the standard 1 year.
Extended warranty is only valid with proof of purchase or receipt.
Your warranty becomes void should you decide to use non Warmlite spare parts.
Spare parts can be purchased from www.warmlite.co
Should you have a problem with your appliance, or need any spare parts,
please call our Customer Support Team on:
+44 (0) 333 220 6056
