Loading ...
Loading ...
Loading ...
● Do not attempt to straighten the sheet during the loading process, unless instructed to by the front-panel
display.
● Do not use hand-cut sheets, which may be of irregular shapes. Use only purchased sheets.
In case of any problem, follow the instructions given on the front-panel display.
If you would like to start the load process again, cancel the process on the front panel; the printer ejects the
sheet from the front of the printer.
Unsuccessful load from the multi-sheet tray
There are checks to make and steps to correct any problems.
● Check that you have not loaded too many sheets into the tray. The maximum number of sheets depends
on the paper thickness: around 50 sheets of plain, standard paper.
● Check that the sheets are correctly loaded into the tray.
● Check that the sheets are correctly adjusted and centered in the tray.
● Check that you have extended the input and output trays correctly: the rst extension for A4, the second
for A3 paper.
If the paper is hanging over the back of the input tray as shown, it may fail to load.
70 Chapter 11 Troubleshooting paper issues ENWW
Loading ...
Loading ...
Loading ...