Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/59195171-mdo-2104eg/bg82.png)
MDO-2000EG & 2000EX User Manual
128
4. Press Analog Source to choose the
source for the CAN bus is analog.
Define Inputs
5. Press Define Inputs from the lower
menu.
6. From the side menu choose the
CAN Input inputs and the signal
type.
CAN Input
CH1~CH4
Signal
Type
CAN_H, CAN_L, Tx, Rx.
Note
The Sample Point soft-key indicates the sampling
position of each bit. This parameter is fixed.
Bit Rate
The Bit Rate menu sets the bit rate of the bus. The
bit rate is usually tied to the bus length.
7. Press Bit Rate from the bottom
menu and set the bit rate.
Bit Rate
10kbps, 20kbps, 50kbps, 125kbps,
250kbps, 500kbps, 800kbps, 1Mbps
Loading ...
Loading ...
Loading ...