Loading ...
Loading ...
Loading ...
ADVANCED CONFIGURATION
123
3. Press Bus from the bottom menu
and choose the UART serial bus on
the side menu.
4. Press either Analog Source to
choose the sources for the UART
bus is analog.
Define Inputs
5. Press Define Inputs from the bottom
menu.
6. From the side menu choose the Tx
Input and the Rx
Input source and the signal
polarity.
Tx
OFF, CH1~CH4 or OFF
Rx
OFF, CH1~CH4 or OFF
Polarity
Normal (High = 0), Inverted (High = 1)
Configuration
The Configure key sets the baud rate, number of data
bits and parity.
7. Press Configure from the bottom
menu.
8. From the side menu select the Baud rate, Data
bits, Parity, Packets and End of Packet bits.
Baud Rate
50, 75, 110, 134, 150, 300, 600, 1200,
1800, 2000, 2400, 3600, 4800, 7200,
9600, 14400, 15200, 19200, 28800,
31250, 38400, 56000, 57600, 76800,
115200, 128000, 230400, 460800,
921600, 1382400, 1843200, 2764800
Data Bits
8 (fixed)
Loading ...
Loading ...
Loading ...