Loading ...
Loading ...
Loading ...
EN
40
Control Lock function
The control lock is a device that protects the appliance from accidental or inappropriate use. With all
cooking zones turned off, simultaneously press and turn two knobs counterwise in overwind position
“A”. They need to be hold in that position for a least 2s until the symbols “L” appear on the displays,
then release the knobs.
30” / 36” 48”
In order to deactivate the CL function repeat the same procedure as for activating.
After unlocking all knobs have to be turned back in the zero position (if any knob was in a position
different from zero). The control is than off and can be operated as expected.
NOTE: If the knobs are not hold in the OWL position for long enough the CL will not be enabled /
displayed. If the knobs are hold in that position for more than 30 seconds the input is considered to be
invalid and a error message “Permanent use of key” will be displayed (flash symbol ).
Residual Heat indication
Cooking zones which are already switched off can still have a hot glass surface. In order to warn and
protect users from burning themselves this condition is visualized, the residual heat measurement is
done from the temperature sensor of each inductive cooking zone..
When the measured temperature drops below 60°C / 140°F on the glass the symbol indicating the
hot surface disappears.
Loading ...
Loading ...
Loading ...