Loading ...
Loading ...
Loading ...
c) Release the Nylon cutting head.
Straight shaft: Use screw driver to hold flange andthen rotate the Nylon cutting head clockwise,
it will be replaced.
d) Fit the blade (Only for straight shaft, forbidden used in curved shaft ). Take the outer flange
off after release the nut, then put the blade, outer flange, shield and nutaccording to priority as
below picture. Note the blade rotation direction needs be same as below picture. Use screw driver
to hold flange and tighten nut counter-clockwise, ensure the nut is tightened enough.
e) Release blade. Use screw driver to hold flange and release nut, the blade can be tookoff.
Warning!
Pleasemakesurethecutting head has been assembled correctly before use!
8
Loading ...
Loading ...
Loading ...