Wild Badger Power WB26MTSE 26cc Weed Wacker Gas Powered, 4 in 1 String Trimmer, Wheeled Edger

Operator’s Manual - Page 31

For WB26MTSE. Also, The document are for others Wild Badger Power models: WBPMT26P

PDF File Manual, 36 pages, Read Online | Download pdf file

WB26MTSE photo
Loading ...
Loading ...
Loading ...
Change and clean the spark plug
-Periodically remove and clean the spark plug using a metal brush to get rid of any
deposits.
-Check and reset the correct distance between the electrodes.
-Replace the spark plug and fasten it firmly using the supplied wrench.
-The spark plug must be replaced with one with the same characteristics
whenever the electrodes have burnt or the insulation has worn, and in
any case every
100 working hours.
Clean the air filter
IMPORTANT Cleaning the air filter is essential to guarantee the efficiency and duration of
the machine. Do not work withadamaged filter or without a filter, as this could permanentl
y
damage the engine. It must be cleaned after every 12 working hours.
Clean the filter as follows:
Loosen the knob, remove the cover and the filter element
Washthefilter element with soap and water. Do not use petrol or other solvents.
Leavethefilter to dry in the open air.
Fit the filter element and the cover back on, tightening the knob again
.
Warning!
Never run the engine without the air filter element installed.
Head line replacement
1.Openthenylonhead lower housing by pressing the two clamps
2.Allignthespoolarrows to the upper housing hole
3.Insert the line from the hole of back side of the spool and the hole pf upperhousing,
stretch to the other side of the hole.
4.Refit the lower nylon headhousing
5.Turn the tips clockwise till the line is suitable

Loading ...
Loading ...
Loading ...