Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/20310202-wb26mtse/bg10.png)
6. When the engine is running and idling, the throttle lever on handle is as below picture.
First press the lock off lever and then switch the throttle lever on, the machine will be
working.
7. Adjusting line length when working: This machine is fitted with a “Tap & Go”head.To
release more line, tap the cutting line head against the round with engine at top speed: the
line will be released automatically and the knife cut off the excesslength.
8. If any problem occurs, press the engine switch, the machine will stop running.
If you need stop cutting head working, release the throttle lever.
9. If any problem occurs, pull the pin of safety belt, then release the brush cutter immediately.
10. Hot start: If the machine is hot, the throttle level can be adjusted to ON position directly when
restart the machine.Then repeat step 1,3,5
ATTENTION: The switch would always stays "ON" position, once press it to "OFF"
and release the switch, it returns to "OFF"
Loading ...
Loading ...
Loading ...