Loading ...
Loading ...
Loading ...
Cutting data hedge trimmer
Cutting circle diameter
0.95 in. (24mm)
Blade length
16 in. (430mm)
Cutting length
15.75 in. (400mm)
Max. cutting speed
1550/min max.
Cutting data pole saw
Blade length
10in.(254mm)
Cutting length
9.4in.(240mm)
Chain link thickness
0.05 in. (1.1mm)
Oil tank capicity
180 ml
Model name
WBPMT26P/WB26MTSE
Engine type
Air-Cooled, 2-Cycle
Engine displacement
25.4cc (1.52 cu. in.)
Rated motor power
0.7kw
Volumes of fuel tank
20 oz. (600ml)
Fuel/Oil ratio
50:1
Cutting diameter for nylon head for straight
shfat
16.9in. (430mm)
Trimmin
g line
0.095 in. (2.4mm)
Max. engine speed-trimmer
(with nylon head, no-load)
9000/min for straight shaft
Max. engine speed-brush cutter
(straight shaft with 3T blade, no-load)
10500/min
Cutting dia. With 3T blade (straight
shaft )
255mm
Cutter balde thickness
0.055 in. (1.4mm)
Cutting data edger
Cutting length
9 in. (226mm) for straight shaft edger
SPECIFICATIONS*
* All specifications are based on the latest product information available at the time of printing. We reserve the right to make changes at any
time without notice.
ASSEMBLY
When assembling this machine, please follow the instructions for assembly steps.
1. Mounting the rod: Push the pin(C) of shaft A into the coupler and make sure the pin insert into hole E, then tighten knob D
For attachments
except edger
For edger attachment
2. Assemble the handle on the machine.
-
Fit the sleeve (2) &lower part (3) with guard, placing the pin (3a) in one of the three holes on the drive tube.
-
Fit the front handgrip (4) by using the screws (5).
-
Before tightening the screw (4), align the handgrip correctly with respect to the drive tube.
-
Fully tighten the screw (5).
6
Loading ...
Loading ...
Loading ...