Loading ...
Loading ...
Loading ...
Pull the sprung pin (1) out of the latch (2) and engage into different latches..
A
fter setting the desired position, release the sprung pin (1)again
.
Attention: The sprung pin (1) must engage firmly in the latch(2).
Cutting sequence
T
oallow branches a free fall,always cut the lower branches first. Prune heavy branches (larg
e
d
iameter) in several controllable pieces.
W
orking position
H
old the control handle with your right hand, and the drive tube with your left hand.Your left
arm
should be extended to the most comfortable position.
Theshaft should always be held at an angle of 60° or less!
Th
e most convenient working position is a tool angle of 60°, but any lesser angle may be use
d to
suit the situation concerned.
Cross-cutting
To avoid pinching the bar in the cut, position the cutting attachment with the hook against
t
he branch andthen perform the cross-cut from the top downwards.
Relieving cut
Loading ...
Loading ...
Loading ...