Loading ...
Loading ...
Loading ...
The design and type of carry strap may vary.
PLEASE NOTE:This carry strap has a safety device allowing you to immediately disc
onnect
the strap from the machine in an emergency. To do so, pull forcefully on the red pull tab
(as
above pic. shows) on the strap. This disconnects the strap from the holding fixture immediat
ely.
N
OTE: Never start the motor with the carry strap attached to the machine!
Do not use your power scythe attachment during other people’s rest periods.
Preparations
A
lways wear a harness.
V
ertical cut (with straight cutter bar)
Large working radius even without additional aids
Vertical cut (with angled cutter bar)
Cutting without standing directly next to hedge
Horizontal cut (with straight cutter bar)
C
utting without standing directly in front
of
the hedge - large working radius
Horizontal cut (with angled cutter bar)
C
utting close to the ground from a standin
g
position, e.g. low shrubs
Overhead cut (with angled cutter bar)
H
old the hedge cutter above your head andswi
ng
it in an arc to make maximum use of its reach.
Do not throw cuttings in the rubbish bin
(garbagecan) -they can be composted
Any working position above head height is tiring.
To minimize the risk of accidents, work in such
positions for short periods only. Set angle of
adjustable cutter bar to maximum so that the unit
can be held in a lower, less tir-tir-ing position (wit
h
harness) while still providing adequate vertical
reach.
Loading ...
Loading ...
Loading ...