Loading ...
Loading ...
Loading ...
-Start the cut at least half throttle and continue cutting at full throttle
-Hold and guide the unit so that the blade is vertical
-Cut steadily so that the engine speed does not decline to any major extent. Do not apply force
-Cut at a normal walking pace
-Do not push the blade into the ground
-Always walk forwards when cutting , do not pull the unit towards you
-Cut at a steady pace-this avoids having to make several passes
-Use the gunning sight ( 1 ) for the cutting blade to align the blade to the edge
Replacing
the cutting blade / Edger Attachment
Do not attempt to straighten or weldabent or cracked blade - it may break - it must be replaced
Replace the blade ( 1 ) if its length is no longer sufficient to maintain the necessary ground clearance and obtain
the required depth of cut.
ATTENTION : when replacing parts or doing maintenance , make sure switching off the engine until the cutting
parts stop rotary
Loading ...
Loading ...
Loading ...