Loading ...
Loading ...
Loading ...
2 . Insert the tube in the gearbox with two holes alligned , screws two holes tightly, then tighten the gear box hole
7 with screw provided.
3 .Installing the attachment
-Aligh the pin (C) with the hole of the shaft connector hole (E), inset the shaft (A) to the shaft connector until the
pin get into the hole(E) and screw the knob (D)
4. Install the blade
There are 3 holes in the gearcase, place the Allan key S4 into the holes B, put the nut,f langes, and blades by
above sequence, rotary the flange 4 and until allan key S4 into the whole of flange 4, turn the nut(1) by
anti-clockwise tightly with a socket wrench. Release the allay key.
Loading ...
Loading ...
Loading ...