Loading ...
Loading ...
Loading ...
Chapter 18 Store and Load RIGOL
MSO5000-E User Guide 18-5
overwritten and asking you whether to continue or not.
6) Press Save to save the set setup f ile to the selected folder in "* .stp" format.
Tip
1. After saving the reference waveform, press Ref More Export to enter
the disk management interface of reference waveform f ile storage.
2. Press Utility PassFail to enable the pass/ fail test function. Then press
Mask Save to enter the disk management interface of pass/ fail test mask
f ile storage.
2. Load the Setup File from the I nternal Memory ( Take Load Setup as an
Example)
1) Press St orage Load Setup to enter the setup load interface. The disk
management interface is displayed automatically. By default, "Local Disk(C)"
is selected.
2) Rotate the multifunction knob
or enable the touch screen to open the
internal memory storage interface.
3) Rotate the multifunction knob
to select the desired storage location,
and then press down the knob to open it. You can also enable the touch
screen to select the storage location. Rotate the multifunction knob
to
select
, then press down the knob or enable the touch screen to tap
to go to the previous location.
4) Rotate the multifunction knob
to select the f ile to be loaded (the default
f ile type is in "* .stp" format). Then, the Load menu is enabled. Press Load
to load the selected f ile. You can also enable the touch screen to operate.
Tip
Press Ref More I mport to enter the disk management interface of
reference waveform f ile load.
Press Utility PassFail
to enable the pass/ fail test function. Then press
Mask Load
to enter the disk management interface of pass/ fail test mask
f ile load.
Loading ...
Loading ...
Loading ...