Loading ...
Loading ...
Loading ...
2271A
Operators Manual
38
Table 12. Control Setup Menu
2
3
1
4
5
6
hwr012.eps
Item Tab Function
Mode
Choose between Dynamic or Static mode. See Pressure Control
Settings.
Step Size The size of the pressure step.
Slew Rate
A user-configurable control parameter that adjusts how fast the
Product controls pressure to the setpoint.
Ready
Tolerance
(Shown only
when Dynamic
is selected.)
Related and used only with Dynamic Control mode, the Ready
Tolerance is a configurable band to define the ready condition for the
measurement. The band creates a positive and negative boundary
around the Setpoint pressure. The measurement indicator shows “Not
Ready” until the pressure is stable within the band.
Control Limit
(Shown only
when Static is
selected)
Related and used only with the Static Control mode, the control limit is
used to set an upper and lower pressure limit around the Setpoint. The
Product keeps the pressure within defined user limits. See the Static
Control Mode and Control Limits (Only for Static Control sections.
Stability Limit
(Shown only
when Static is
selected.)
Related and used only for the Static Control mode, the stability limit is
a configurable tolerance to define the ready condition for the
measurement. The measurement indicator shows “Not Ready” until
the pressure is as stable as the value set in the stability limit. See the
Stability Limits (Only for Static Control) section for more information.
Defaults Returns the parameters of this menu to factory default settings.
Safety Limits
Protective user-configurable limits to protect the UUT from over-
pressure. An upper, lower, and vent limit can be manually set. See the
Safety Limits section.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...