Loading ...
Loading ...
Loading ...
Automated Pressure Calibrator
Symbols
3
• Make sure the ground conductor in the mains power cord is connected to
a protective earth ground. Disruption of the protective earth could put
voltage on the chassis that could cause death.
• Replace the mains power cord if the insulation is damaged or if the
insulation shows signs of wear.
• Use the Product only as specified, or the protection supplied by the
Product can be compromised.
• Do not apply more than the rated voltage, between the terminals or
between each terminal and earth ground.
• Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V dc.
• Do not use the Product if it operates incorrectly.
• Disable the Product if it is damaged.
• Do not use test leads if they are damaged. Examine the test leads for
damaged insulation and measure a known voltage.
• Keep fingers behind the finger guards on the probes.
• Do not apply pressures over the rated pressure of any port of the Product.
• Use care when handling the sharp threads of the test ports.
• Use both handles to lift and carry the Product.
Symbols
The symbols used in this manual and on the Product are shown in Table 1.
Table 1. Symbols
Symbol Description
X WARNING. HAZARDOUS VOLTAGE. Risk of electric shock.
W WARNING. RISK OF DANGER.
Consult user documentation.
)
Certified by CSA Group to North American safety standards.
P
Conforms to European Union directives.
Conforms to relevant Australian EMC standards.
Fuse
à Conforms to relevant South Korean EMC Standards.
~
This product complies with the WEEE Directive marking requirements. The affixed label
indicates that you must not discard this electrical/electronic product in domestic household
waste. Product Category: With reference to the equipment types in the WEEE Directive
Annex I, this product is classed as category 9 "Monitoring and Control Instrumentation"
product. Do not dispose of this product as unsorted municipal waste.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...