Loading ...
Loading ...
Loading ...
Automated Pressure Calibrator
Setup Menu
21
Remote Port Menu
Use the Remote Port menu to change or view the USB, RS-232, Ethernet port
settings, and Emulation Mode explained in Table 7.
Table 7. Remote Port Menu
Tab Description
USB Setup
Use this menu to change the remote interface (Remote IF) to be from a PC or
terminal. The End of Line character (EOL) can be specified as Carriage Return
(CR), Line Feed (LF), or Carriage Return and Line Feed (CRLF).
RS-232 Setup
Use this menu to specify the RS-232 communication parameters. The editable
parameters are:
• Data Bits
• Stop Bits
• Flow Control
• Parity
• Baud
• EOL
• Remote IF
Select Defaults to reset the RS-232 port to its default values.
Ethernet Setup
Use this menu and the numeric keypad or PC keypad to specify or edit these
parameters:
• Host Name
• IP Address
• Gateway
• Subnet Mask
• DHCP (ON or OFF)
• Remote IF (interface)
• Port
External 24V Menu
Use this menu to select which driver port on the rear of the Product is in use. The
choices are DRV1 – DRV4. See the Configure the Drivers section for more
information.
CPS Menu
Use this tab to choose if a Contamination Prevention System (CPS) is installed.
See the Contamination Prevention System (CPS) section for more information.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...