Loading ...
Loading ...
Loading ...
2271A
Operators Manual
24
Table 9. Front-Panel Features (cont.)
Item Description
Test ports which can be connected with UUTs or a test station (with caps). The Product can
be equipped with two different types of test ports: P3000 or M20x1.5. The Product comes with
a full set of adapters.
Numbered keys to change numerical values on the Product user interface. To enter a value,
select an editable section of the display and then change the numerical values with the
numbered keys. Push
to accept and set the entry. For example, to set an output of
100 psi, push and then push
.
Note
Use to give an entry a positive or negative value, but if this button is
pushed and held, it will lock the front control panel. Push to unlock
the control panel.
The Product controls pressure when in the Control mode only. See the
Control Modes section for more information.
– As a new value is entered with the numbered keys, push this button to delete the last
key entry.
– Push to clear the value entry in progress.
– Push as the final step when inputting a numerical value.
When on the main menu, use the Jog Knob to make fine adjustments to the setpoint value.
When turned, the value changes by the least significant digit based on the measurement
resolution refer to the Measurement Resolution section for more information. Jogging the
pressure with the Jog Knob adjusts the Setpoint value in any mode but will only actively
change the applied pressure while in Control mode. Turn counter-clockwise to decrease
pressure or clockwise to increase. The Jog Knob can also be used to quickly navigate menus.
– Push to quickly enter a pressure value to control to.
– Push to put the Product into standby mode. In standby, the display is off and the
keys are disabled. Standby mode also disables remote operation. See the Turn on the
Product section.
– Push to immediately vent the system pressure and stop all pressure control. In
addition, remote communication is stopped and the Product enters a safety mode until
manually deactivated. See the Vent and Abort section for more information.
– Push this button to enter the Setup Menu.
– Use these arrow buttons to move the cursor through the UI. As the different UI
items are highlighted, the softkey
becomes active and turns to Select. The Jog Knob
can also be used for navigation as well.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...