Hikvision DS-2TD4228-10\/S2 Hikvision DS-2TD4228-10/S2 User Manual

Loading ...

TCP-based full-duplex communicaon protocol port for plug-in free preview.

WebSockets Port

TCP-based full-duplex communicaon protocol port for plug-in free preview. Cercate

vericaon is required to ensure the secure access.

Note

●

Enhanced SDK Service Port, WebSocket Port, and WebSockets Port are only supported by certain

models.

●

For device models that support that funcon, go to Conguraon → Network → Advanced

Sengs → Network Service to enable it.

12.3 Port Mapping

By seng port mapping, you can access devices through the specied port.

Before You Start

When the ports in the device are the same as those of other devices in the network, refer to Port

to modify the device ports.

Steps

Go to

Conguraon → Network → Basic Sengs → NAT .

Select the port mapping mode.

Auto Port Mapping

Refer to Set Auto Port Mapping for detailed informaon.

Manual Port Mapping Refer to Set Manual Port Mapping for detailed informaon.

Click Save.

12.3.1 Set Auto Port Mapping

Steps

Check Enable UPnP™, and choose a friendly name for the camera, or you can use the default

name.

Select the port mapping mode to Auto.

Click Save.

Note

UPnP™ funcon on the router should be enabled at the same me.

Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual

Loading ...

Hikvision DS-2TD4228-10\/S2 DS-2TD4228-10/S2 Thermal and Optical Bi-spectrum Network Speed Dome