1. Home
  2. Hikvision
  3. Hikvision DS-2TD4228-10\/S2 User Manual
  4. Page 25

Hikvision DS-2TD4228-10\/S2 DS-2TD4228-10/S2 Thermal and Optical Bi-spectrum Network Speed Dome

Hikvision DS-2TD4228-10/S2 User Manual - Page 25

For DS-2TD4228-10\/S2.

PDF File Manual, 117 pages, Read Online | Download pdf file

DS-2TD4228-10\/S2 photo
Loading ...
Loading ...
Loading ...
2.
Refer to Set Thermography Parameters to set the parameters.
3.
Go to Conguraon → Temperature Measurement → Advanced Sengs , select Expert.
4.
Refer to Set Preset to set a preset.
5.
Select and enable the temperature measurement rules. Please refer to
Set Thermography Rule
for
seng the rule.
6.
Oponal: Click Area's Temperature Comparison to set the alarm rules and the temperature.
7.
Refer to Set Arming Schedule for seng scheduled me. Refer to Linkage Method Sengs for
seng linkage method.
8.
Click Save.
The maximum temperature and thermography rules will be displayed on the live view.
Note
Go to Image → VCA Rules Display to adjust the font size and the temperature color of normal,
alarm and pre-alarm.
9.
Oponal: Call the preset and check if the rules are ecient.
10.
Enable the scan funcon of device, such as linear scan to monitor the scene.
3.3.4 Set Thermography Rule
Steps
1.
Customize the rule name.
2.
Select the rule type to Point, Line, or Area. Then draw a point, line, or area on the interface
where the
posion to be measured.
Point
Please refer to Point Thermography for detailed conguraon.
Line Please refer to Line Thermography for detailed conguraon.
Area Please refer to Area Thermography for detailed conguraon.
3.
Congure the temperature measurement parameters.
Emissivity
Set the emissivity of the target. The emissivity of the surface of a material is its eecveness
in eming energy as thermal radiaon. Dierent objects have dierent emissivity. Refer to
Common Material Emissivity Reference to search for the target emissivity.
Distance
The distance between the target and the device.
Reecve Temperature
If there is any object with high emissivity in the scene, check and set the reecve
temperature to correct the temperature. The reecve temperature should be set the same
as the temperature of the high emissivity object.
4.
Click and set the Alarm Rule.
Alarm Temperature and Pre-Alarm Temperature
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
10
Loading ...
Loading ...
Loading ...