Hikvision DS-2TD4228-10\/S2 Hikvision DS-2TD4228-10/S2 User Manual

Loading ...

3.3 Automac Thermography

Congure the temperature measurement parameters and temperature measurement rules. The

device can measure the actual temperature and output alarms when temperature exceeds the

alarm threshold value.

3.3.1 Set Thermography Parameters

Congure the parameters of temperature measurement.

Steps

Go to

Conguraon → Local , enable Display Temperature Info.

Display Temperature Info.

Select Yes to display temperature informaon on live view.

Enable Rules to display the rules informaon on live view.

Click Save.

Go to Conguraon → Temperature Measurement → Basic Sengs to congure parameters.

Enable Temperature Measurement

Check to enable temperature measurement

funcon.

Enable Color-Temperature

Check to display Temperature-Color Ruler in live view.

Display Temperature Info. on Stream

Check to display temperature informaon on the stream.

Display Temperature in Opcal Channel

Check to display thermal channel temperature informaon in the opcal channel.

Display Max./Min./Average Temperature

Check to display maximum/minimum/average temperature informaon on liveview when the

temperature measurement rule is line or area.

Posion of Thermometry Info

Select the posion of temperature informaon showed on the live view.

●

Near Target: display the informaon beside the temperature measurement rule.

●

Top

Le: display the informaon on the top le of screen.

Add Original Data on Capture

Check to add data on alarm triggered capture of thermal channel.

Add Original Data on Stream

Check to add original data on thermal view.

Data Refresh Interval

Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual

Loading ...

Hikvision DS-2TD4228-10\/S2 DS-2TD4228-10/S2 Thermal and Optical Bi-spectrum Network Speed Dome