Hikvision DS-2TD4228-10\/S2 Hikvision DS-2TD4228-10/S2 User Manual

Loading ...

Select a channel to overlay picture.

Click Browse to select a picture, and click Upload.

The picture with a red rectangle will appear in live view aer successfully uploading.

Check Enable Picture Overlay.

Drag the picture to adjust its posion.

Click Save.

10.8 Set Manual DPC (Defecve Pixel Correcon)

If the amount of defecve pixels in the image is comparavely small and accurate correcon is

needed, you can correct these pixels manually.

Steps

Go to

Conguraon → Image → DPC .

Select the thermal channel.

Select manual mode.

Click the

defecve pixel on the image, then a cursor shows on the live view.

Click Up, Down, Le, Right to adjust the cursor posion to the defecve pixel posion.

Click , then click to correct defecve pixel.

Note

If mulple defecve pixels need to be corrected, click aer locang a defecve pixel. Then

aer locang other pixels, click to correct them simultaneously.

Oponal: Click to cancel defecve pixel correcon.

10.9 Set Picture in Picture

You can overlay the images of two channels and view the image of two channels at the same me.

Steps

Select a channel number.

Select the picture in picture mode.

Overlap Mode

Paral image of thermal channel is displayed on the full screen of opcal

channel. This mode is only supported in opcal channel.

Details Overlay

Mode

The device displays the details of opcal channel on thermal channel. This

mode is only supported in thermal channel.

In Details Overlay Mode, set the Fusion Distance of the target. It is recommended to use the

default value.

Click Save.

Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual

Loading ...

Hikvision DS-2TD4228-10\/S2 DS-2TD4228-10/S2 Thermal and Optical Bi-spectrum Network Speed Dome