Hikvision DS-2TD4228-10\/S2 Hikvision DS-2TD4228-10/S2 User Manual

Loading ...

Steps

Go to Conguraon → VCA → Scene Conguraon → Scene x → Rule .

Click to add a new rule.

Enter the rule name, and click the drop down menu to select Rule Type.

Note

Each scene can be congured with dierent rule types. Up to 8 rules can be set for one scene.

Line Crossing

If any target move across the seng line, the alarm will be triggered. You can set the crossing

direcon.

Intrusion

If any target intrude into the pre-dened region longer than the set duraon, the alarm will

be triggered.

Region Entrance

If any target enters the pre-dened region, the alarm will be triggered.

Region Exing

If any target exits the pre-dened region, the alarm will be triggered.

Set parameters of the rule.

Sensivity

The higher the value is, the more easily the alarm can be triggered.

Target Detecon

You are recommended to select the target as Human & Vehicle. In distant view, the device

cannot classify the target with pixels less than 10*10. The target will be recognized as

human directly. So the selecon of this item will not trigger false alarm or missing alarm.

Background Interference Suppression

Eliminate the environment interference to reduce the false alarm. For example, the wind

blows grass.

Draw the rules.

When the rule type is selected as Line Crossing, click

to draw a line in the live view. You can

drag end points of the line to adjust the posion and length.

Line Crossing

You can set the crossing

direcon. Bidireconal, A-to-B, or B-to-A are selectable.

When the rule type is selected as Intrusion, Region Entrance, Region Entrance, click

draw an area in the live view. Right click the mouse to

nish drawing.

Duraon

The device performs perimeter protecon when the target stays in the detecon area for

more than set value.

Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual

Loading ...

Hikvision DS-2TD4228-10\/S2 DS-2TD4228-10/S2 Thermal and Optical Bi-spectrum Network Speed Dome