Hikvision DS-2TD4228-10\/S2 Hikvision DS-2TD4228-10/S2 User Manual

Loading ...

Chapter 7 Arming Schedule and Alarm Linkage

Arming schedule is a customized me period in which the device performs certain tasks. Alarm

linkage is the response to the detected certain incident or target during the scheduled

me.

7.1 Set Arming Schedule

Set the valid

me of the device tasks.

Steps

Click Arming Schedule.

Drag the

me bar to draw desired valid me.

Note

Up to 8 periods can be congured for one day.

Adjust the me period.

Click on the selected me period, and enter the desired value. Click Save.

Click on the selected

me period. Drag the both ends to adjust the me period.

Click on the selected me period, and drag it on the me bar.

Oponal: Click Copy to... to copy the same sengs to other days.

Click Save.

7.2 Linkage Method

Sengs

You can enable the linkage funcons when an event or alarm occurs.

7.2.1 Trigger Alarm Output

If the device has been connected to an alarm output device, and the alarm output No. has been

congured, the device sends alarm informaon to the connected alarm output device when an

alarm is triggered.

Steps

Note

This funcon is only supported by certain models.

Go to Conguraon → Event → Basic Event → Alarm Output .

Set alarm output parameters.

Automac

Alarm For the informaon about the conguraon, see Automac Alarm .

Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual

Loading ...

Hikvision DS-2TD4228-10\/S2 DS-2TD4228-10/S2 Thermal and Optical Bi-spectrum Network Speed Dome