Hikvision DS-2TD4228-10\/S2 Hikvision DS-2TD4228-10/S2 User Manual

Loading ...

Select log types, Start Time, and End Time.

Click Search.

The log les that match the search condions will be displayed on the Log List.

Oponal: Click Export to save the log les to your computer.

Set Log Server

The log server should support syslog (RFC 3164) over TLS.

Before You Start

●

Install client and CA

cercates before conguraon. Refer to Cercate Management for

detailed

informaon.

●

Select

cercates according to the requirement of the log server. If two-way authencaon is

required, select the CA

cercate and the client cercate. If one-way authencaon is

required, select the CA cercate only.

Steps

Check Enable Log Upload Server.

Oponal: Check Enable Encrypted Transmission if you want the log data to be encrypted.

Input Log Server IP and Log Server Port.

Oponal: Select client cercate.

Select CA cercate to the device.

Click Test to test the

sengs.

Click Save.

Cercate

Management

It helps to manage the server/client cercates and CA cercate, and to send an alarm if the

cercates are close to expiry date, or are expired/abnormal.

Note

The funcon is only supported by certain device models.

13.15.3 Set IP Address Filter

IP address lter is a tool for access control. You can enable the IP address lter to allow or forbid

the visits from the certain IP addresses.

IP address refers to IPv4.

Steps

Go to

Conguraon → System → Security → IP Address Filter .

Check Enable IP Address Filter.

Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual

Loading ...

Hikvision DS-2TD4228-10\/S2 DS-2TD4228-10/S2 Thermal and Optical Bi-spectrum Network Speed Dome