Hikvision DS-2TD4228-10\/S2 Hikvision DS-2TD4228-10/S2 User Manual

Loading ...

3.3.2 Set Normal Mode

This funcon is used to measure the temperature of the whole scene and alarm.

Steps

Go to Conguraon → Temperature Measurement → Basic Sengs , and check Enable

Temperature Measurement.

Refer to

Set Thermography Parameters to set the parameters.

Go to

Conguraon → Temperature Measurement → Advanced Sengs , and select Normal.

Congure the parameters of normal mode.

Emissivity

Set the emissivity of your target. The emissivity of each object is dierent.

Distance

The distance between the target and the device.

Pre-Alarm Threshold

When the temperature of target exceeds the pre-alarm threshold, and this status keeps more

than Filtering Time, it triggers pre-alarm.

Alarm Threshold

When the temperature of target exceeds the alarm threshold, and this status keeps more

than Filtering Time, it triggers alarm.

Pre-Alarm Output and Alarm Output

Check Pre-Alarm Output and Alarm Output to link the pre-alarm or alarm with the

connected alarm device.

Refer to

Set Arming Schedule for seng scheduled me. Refer to Linkage Method Sengs for

seng linkage method.

Click Save.

The maximum and minimum temperature will be displayed on the live view.

Note

Go to Image → VCA Rules Display to adjust the font size and the temperature color of normal,

alarm and pre-alarm.

3.3.3 Set Expert Mode

Select the temperature measurement rules from Point, Line, or Area and congure parameters,

the device alarms if the alarm rules are met.

Steps

Go to

Conguraon → Temperature Measurement → Basic Sengs , check Enable

Temperature Measurement.

Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual

Loading ...

Hikvision DS-2TD4228-10\/S2 DS-2TD4228-10/S2 Thermal and Optical Bi-spectrum Network Speed Dome