Loading ...
Loading ...
Loading ...
96 / 99
No record waveform
！
It will be prompt when no recording data, play waveform,
stop the operating.
No user-defined parameter
！
It will be prompt when open measurement statistics but no
user-defined parameter.
In MultiScope, this function is
forbidden.
It will be prompt when using auto-calibration, recording
waveform and pass test in Multi-Scopes.
Keypad is locked.
It will be prompt when open the upper computer.
Keypad is unlocked.
It will be prompt when cut-off the upper computer.
Input the file name.
It will be prompt when confirm the input file name.
The file list is empty.
It will be prompt when recall the reference waveform and
the setting file, the recall list is empty.
In roll mode, this function is
forbidden.
It will be prompt when turn on extend timebase, XY,
waveform storage, recording waveform, Pass test and
MATH in ROLL mode.
In MultiScope, this function is
forbidden.
It will be prompt when using extend window, MATH, open
XY and DECODE function in Multi-Scopes.
In DHCP mode, key is not worked.
It will be prompt when confirm IP configuration in DHCP
mode.
Invalid subnet mask.
It will be prompt when the subnet mask value is out of
255.255.255.0.
Auto-calibration is failed.
It will be prompt when the auto-calibration is failed.
Auto-calibration is succeed.
It will be prompt when the auto-calibration is completed and
succeed.
Exit the recording.
It will be prompt when press RUN/STOP key during
recording waveform or the record is completed.
Recording is completed.
It will be prompt when press RUN/STOP key during
recording waveform or the record is completed.
In FFT mode, cursor is forbidden.
Please use FFT marker function.
In FFT, It will be prompt when using the CURSOR function.
In FFT split mode, this function is
forbidden.
In FFT split screen, it will be prompt when turn on XY.
Stop Pass/Fail function.
It will be prompt when the pass test is closed.
MultiScope is loading, please wait...
It will be prompt when turn on Multi-Scopes.
EXIT MultiScope, please wait…
It will be prompt when turn off Multi-Scopes.
Loading ...
Loading ...
Loading ...