Loading ...
Loading ...
Loading ...
94 / 99
16.1 Description of System Prompt
This chapter is to describe the system prompt, the detailed explanation as shown in Figure 16-1.
Table 16-1
Adjusting is up to extremity!
It is prompt that the adjusting is up to extremity in the
current status. It cannot be adjust. It will be prompt when
timebase rotary knob, horizontal displacement, vertical
displacement, trigger level, trigger time is up to extremity.
Saving, please wait…
It will be prompt when save waveform and the setting file.
Loading, please wait…
It will be prompt when recall the setting file.
Storage is succeed.
It will be prompt when save waveform, the setting file,
decoding data is succeed.
Storage is failed.
It will be prompt when save waveform, the setting file,
decoding data is failed.
The setting is succeed.
It will be prompt when recall the reference waveform and
the setting file is set successfully.
The setting is failed.
It will be prompt when fail to set recall the reference
waveform and the setting file.
The factory setting is succeed.
It will be prompt when the Default function is enabled.
The signal is not detected.
It will be prompt when AUTO operating is performed but no
input signal.
In XY mode, this function is
forbidden.
It will be prompt when turn on extend window in XY mode.
In FFT mode, this function is
forbidden.
It will be prompt when opening FFT, entering waveform
recording, pass test and open the bus.
In waveform recording, this function
is forbidden.
It will be prompt when switch the storage depth in waveform
recording.
In recording, please exit the
record
！
It will be prompt when switch the extend window in
waveform recording.
Detect USB device is failed
！
It will be prompt when plug in USB, USB identify failed and
plug out when USB loading the setting file.
USB device is removed.
It will be prompt when USB is plug out.
Loading ...
Loading ...
Loading ...