Loading ...
Loading ...
Loading ...
95 / 99
In extend timebase, this function is
forbidden.
It will be prompt when turn on extend timebase and pass
test.
In Multi-Scopes, this function is
forbidden.
It will be prompt when using auto-calibration, extend
window, recording waveform, pass test, MATH, open XY
and DECODE function in Multi-Scopes.
PrintScreen is succeed.
It will be prompt when PrtSc is succeed.
PrintScreen is failed.
It will be prompt when PrtSc is failed.
Invalid expression
！
It will be prompt when expression is invalid in MATH
advanced operation.
IP address is configured succeed.
It will be prompt when IP address is configured succeed.
IP address is configured failed.
It will be prompt when IP address is configured failed.
Automatic configure IP address,
please wait…
It will be prompt when adjust IP type to DHCP.
Clearing the data, please wait…
It will be prompt when using the clear data function.
Data is successful deleted.
It will be prompt when clear data is completed.
User-defined is successful deleted.
It will be prompt when the user-defined parameter is
cleared.
The system is shutting down…
It will be prompt when the oscilloscope is shutting down.
This function is invalid when it in
STOP
！
It will be prompt when turn on/off Multi-Scopes, switch
storage depth and sampling mode, XY function in STOP
state.
Automatic setting is completed.
It will be prompt when automatic setting is completed.
Turn on reference channel
It will be prompt when select a not open channel during
creating template in Pass test mode.
Press RUN/STOP to stop the
operating.
It will be prompt when using Multiple function rotary knob to
adjust the value of chip selection in FFT-waterfall curve.
Input parameter is invalid
！
It will be prompt when input parameter via the soft keypad is
not within input range.
Channel is not open
！
It will be prompt when channel is not open, waveform
storage, vertical movement, horizontal movement, adjusting
timebase scale, adjusting volts/div scale and adjusting
trigger level.
Exceed the maximum limit
！
It will be prompt when the input character of File name
（
storage waveform, the setting file, decoding data
）
is
exceed 12.
Loading ...
Loading ...
Loading ...