Hikvision DS-K1T343EX User Manual

Loading ...

Chapter 4 Wiring

You can connect the RS-485 terminal with the RS-485 card reader, connect the NC/NO and COM

terminal with the door lock, connect the SEN and GND terminal with the door contact, the

BTN/GND terminal with the exit buon, and connect the Wiegand terminal with the access

controller.

If connect the WIEGAND terminal with the access controller, the face recognion terminal can

transmit the authencaon informaon to the access controller and the access controller can

judge whether to open the door or not.

Note

●

If cable size is 18 AWG, you should use a 12 V power supply. And the distance between the

power supply and the device should be no more than 20 m.

●

If the cable size is 15 AWG, you should use a 12 V power supply. And the distance between the

power supply and the device should be no more than 30 m.

●

If the cable size is 12 AWG, you should use a 12 V power supply. And the distance between the

power supply and the device should be no more than 40 m.

●

The external card reader, door lock, exit buon, and door magnec need individual power

supply.

4.1 Terminal Descripon

The terminals contains power input, RS-485, Wiegand output, and door lock.

The descripons of the terminals are as follows:

Table 4-1 Terminal Descripons

Group No. Funcon Color Name Descripon

Group A A1 Power Input Red +12 V 12 VDC Power

Supply

A2 Black GND Ground

Group B B1 RS-485 Yellow 485+ RS-485 Wiring

B2 Blue 485-

B3 Black GND Ground

Group C C1 Wiegand Green W0 Wiegand

Wiring 0

DS-K1T343 Series Face Recognion Terminal User Manual

Loading ...

Hikvision DS-K1T343EX Value Series Face Access Terminal