Hikvision DS-K1T343EX User Manual

Loading ...

Note

These parameters displayed vary according to dierent device models.

COM

Select a COM port for conguraon. COM1 refers to the RS-485 interface and COM2 refers to

the RS-232 interface.

Face Picture Database

select Deep Learning as the face picture database.

Authencate by QR Code

If enabled, the device camera can scan the QR code to authencate. By default, the funcon

is disabled.

Blocklist Authencaon

If enabled, the device will compare the person who want to access with the persons in the

blocklist.

If matched (the person is in the blocklist), the access will be denied and the device will upload

an alarm to the client.

If mismatched (the person is not in the blocklist), the access will be granted.

Save Authencang Face Picture

If enabled, the captured face picture when authencang will be saved on the device.

MCU Version

View the device MCU version.

Click Save.

Set RS-485 Parameters

You can set the access control device's RS-485 parameters including the baud rate, data bit, the

stop bit, parity type, ow control type, communicaon mode, work mode, and connecon mode.

Steps

Note

The RS-485 Sengs should be supported by the device.

Enter the Access Control module.

On the navigaon bar on the le, enter Advanced Funcon → More Parameters .

Select an access control device in the device list and click RS-485 to enter the RS-485 Sengs

page.

Select the serial port number from the drop-down list to set the RS-485 parameters.

Set the serial number, external device, authencaon center, baud rate, data bit, stop bit, parity

type, ow control type, communicaon mode, and working mode in the drop-down list.

DS-K1T343 Series Face Recognion Terminal User Manual

148

Loading ...

Hikvision DS-K1T343EX Value Series Face Access Terminal