Hikvision DS-K1T343EX User Manual

Loading ...

Click Save to save the sengs aer the conguraon.

No.

Set the RS-485 No.

Peripheral Type

Select a peripheral from the drop-down list according the actual situaon. You can select from

Card Reader, Extension Module, Access Controller, or Disable.

Note

Aer the peripheral is changed and saved, the device will reboot automacally.

RS-485 Address

Set the RS-485 Address according to your actual needs.

Note

If you select Access Controller: If connect the device to a terminal via the RS-485 interface, set

the RS-485 address as 2. If you connect the device to a controller, set the RS-485 address

according to the door No.

Baud Rate

The baud rate when the devices are communicang via the RS-485 protocol.

Set Wiegand Parameters

You can set the Wiegand transmission direcon.

Steps

Note

Some device models do not support this funcon. Refer to the actual products when conguraon.

Click Conguraon → Access Control → Wiegand Sengs .

DS-K1T343 Series Face Recognion Terminal User Manual

117

Loading ...

Hikvision DS-K1T343EX Value Series Face Access Terminal